To upgrade or not?

This topic contains 2 replies, has 2 voices, and was last updated by  EliB 1 year, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #13628

    EliB
    Participant

    I bought a full kit from here back on March 6th and have been way too busy to get it assembled. It’s all siting in a tote on a shelf and I think I’m actually ready to start building it. So I come here and find out that now many of my parts are out dated. Dang! What should I do? Should I just build with the parts I already have since that would be the easiest? Upgrade later? Should I use my Prusa to print new parts? It’s not very well tuned and not that dimensionally accurate right now so I’m not sure it would work well.

    Thanks!
    – EliB

    #13632

    Barry
    Participant

    Just build it as is. It will let you get the hang of the software, and how everything works. Later once you get your pursa tuned you can print the new parts. The old style works great.

    #13645

    EliB
    Participant

    So the new parts are just a marginal improvement, not night and day?

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.