Trivet

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Barry Barry 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #13969
    Profile photo of Barry
    Barry
    Participant

    Cut this out today. Had to do a bit of sanding though. Didn’t quite cut all the way through everywhere. Think the plywood is warped. Also need to get some smaller diameter end mills. Used a 1/8th for this, really need a smaller one to get the details.

    Thought this was pretty cool as well.
    https://www.youtube.com/watch?v=ykyB7hJheeI

    #13972
    Profile photo of vicious1
    vicious1
    Keymaster

    Nice! That had to take forever to cut, impressive.

    #13980
    Profile photo of Barry
    Barry
    Participant

    About 3 hours or so.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.