Venus De Milo

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Barry Barry 11 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #10697
    Profile photo of A Trap
    A Trap

    Hey all!

    I thought I would share my first attempt at printing something a bit more complex (for me anyways).
    This is a model from Thingiverse of Venus De Milo.
    4 Walls, 220 Temp, Unheated Bed, 0.15 Layers
    Its cheap PLA, not real fond of it. Under-extrudes, high temps, etc. I should have stuck with esun or hatchbox.
    Anyway, it turned out pretty good (would have been better with other filament), its approx. 165mm tall!

    Now on to that laser…..:)

    Profile photo of Jeffeb3

    What happened to the arms? 🙂

    Profile photo of Barry

    No support material. 😉

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.