Weird Rapid Movement

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 1 year, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13868

    Matt
    Participant

    Ok so everything works great with my machine except one thing. I created a part witch is simple 6 cericles with a hole in the center. But it drills the holes first the rapid movement is supper slow then when it cuts the circles out the movement is just fine. Looking a the gcodes they look the same so i have no idea why it is happening. Any help would be awsome and i attached the nc program that i used. BTW i use eStlcam and Repetier Host.

    ;Project 4inch wheel
    ;Created by Estlcam version 8 build 8.507
    ;Machining time about 12:17:09 AM hours

    G90
    M03 S24000
    G00 Z5.0000

    ;No. 1: Drill 2
    G00 X-66.0408 Y63.4999
    G00 Z0.5000
    G01 Z-5.3340 F60 S24000
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 2: Drill 2
    G00 X-66.0408 Y176.5299 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 3: Drill 2
    G00 X-179.0708 Y176.5299 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 4: Drill 2
    G00 X-179.0708 Y63.4999 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 5: Drill 2
    G00 X-292.1008 Y63.4999 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 6: Drill 2
    G00 X-292.1008 Y176.5299 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G00 Z0.5000
    G00 Z-4.8340
    G01 Z-6.3500
    G00 Z5.0000

    ;No. 7: Part 5
    G00 X-292.1008 Y123.8249 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-344.8058 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-292.1008 Y229.2349 I52.7050 J0.0000
    G02 X-239.3958 Y176.5299 I0.0000 J-52.7050
    G02 X-292.1008 Y123.8249 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-344.8058 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-292.1008 Y229.2349 I52.7050 J0.0000
    G02 X-239.3958 Y176.5299 I0.0000 J-52.7050
    G02 X-292.1008 Y123.8249 I-52.7050 J0.0000
    G00 Z5.0000

    ;No. 8: Part 5
    G00 X-179.0708 Y123.8249 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-231.7758 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-179.0708 Y229.2349 I52.7050 J0.0000
    G02 X-126.3659 Y176.5299 I0.0000 J-52.7050
    G02 X-179.0708 Y123.8249 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-231.7758 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-179.0708 Y229.2349 I52.7050 J0.0000
    G02 X-126.3659 Y176.5299 I0.0000 J-52.7050
    G02 X-179.0708 Y123.8249 I-52.7050 J0.0000
    G00 Z5.0000

    ;No. 9: Part 5
    G00 X-66.0409 Y123.8249 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-118.7459 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-66.0409 Y229.2349 I52.7050 J0.0000
    G02 X-13.3359 Y176.5299 I0.0000 J-52.7050
    G02 X-66.0409 Y123.8249 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-118.7459 Y176.5299 I0.0000 J52.7050 F1800
    G02 X-66.0409 Y229.2349 I52.7050 J0.0000
    G02 X-13.3359 Y176.5299 I0.0000 J-52.7050
    G02 X-66.0409 Y123.8249 I-52.7050 J0.0000
    G00 Z5.0000

    ;No. 10: Part 5
    G00 X-66.0409 Y10.7949 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-118.7459 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-66.0409 Y116.2049 I52.7050 J0.0000
    G02 X-13.3359 Y63.4999 I0.0000 J-52.7050
    G02 X-66.0409 Y10.7949 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-118.7459 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-66.0409 Y116.2049 I52.7050 J0.0000
    G02 X-13.3359 Y63.4999 I0.0000 J-52.7050
    G02 X-66.0409 Y10.7949 I-52.7050 J0.0000
    G00 Z5.0000

    ;No. 11: Part 5
    G00 X-179.0708 Y10.7949 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-231.7758 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-179.0708 Y116.2049 I52.7050 J0.0000
    G02 X-126.3659 Y63.4999 I0.0000 J-52.7050
    G02 X-179.0708 Y10.7949 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-231.7758 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-179.0708 Y116.2049 I52.7050 J0.0000
    G02 X-126.3659 Y63.4999 I0.0000 J-52.7050
    G02 X-179.0708 Y10.7949 I-52.7050 J0.0000
    G00 Z5.0000

    ;No. 12: Part 5
    G00 X-292.1008 Y10.7949 Z5.0000
    G00 Z0.5000
    G01 Z-5.3340 F60
    G02 X-344.8058 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-292.1008 Y116.2049 I52.7050 J0.0000
    G02 X-239.3958 Y63.4999 I0.0000 J-52.7050
    G02 X-292.1008 Y10.7949 I-52.7050 J0.0000
    G01 Z-6.3500 F60
    G02 X-344.8058 Y63.4999 I0.0000 J52.7050 F1800
    G02 X-292.1008 Y116.2049 I52.7050 J0.0000
    G02 X-239.3958 Y63.4999 I0.0000 J-52.7050
    G02 X-292.1008 Y10.7949 I-52.7050 J0.0000
    G00 Z5.0000
    G00 X0.0000 Y0.0000

    M05

    #13871

    Ryan
    Keymaster

    The “F” followed by a number is the speed. So at first it is moving at your plunge rate, when it gets to a cut move the speed is increased.

    You might be able to fix that by entering a speed in the rapid feed box on the values tab. That should give every single line a speed. Let me know if that works.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.