Why does my Start point shoot up by 35mm or so before starting?

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Why does my Start point shoot up by 35mm or so before starting?

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of Hansang Hansang 1 month, 1 week ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #26705
    Profile photo of Hansang
    Hansang
    Participant

    Hello,
    This is a simple engraving run. (MPCNC parts and Ramp stack/motor was purchased here online)

    1) I manually moved the router to the lower left corner in Repetier host.
    2) In Estlcam (ver 9) I used Zero, Create Arbitrary Zero and specified the lower left corner.
    3) Estlcam preview run looks right. But there is no Z axis showing there.

    After I “Save CNC Project” and bring it into Repetier Host, and print, the router travels up by about 35mm and starts engraving in the air.

    I’m using the .66 tool as seen here:
    Tool list

    The tool property is set as seen here:
    Toolprop

    And here’s the Basic Setup of ESTLCAM
    ESTLCAM setup

    And you can see the Repetier Host preview of the job here:
    Repetier host job

    I can see the elevation in the preview, but I don’t know how to stop that. Estlcam and Repetier host is configured like the one in the Assembly, Software section.

    #26706
    Profile photo of Hansang
    Hansang
    Participant

    Gcode looks like this (wouldn’t let me include it)
    ;Project JamesExpert
    ;Created by Estlcam version 9 build 9.018
    ;Machining time about 00:01:07 hours

    G90
    M03 S24000
    G00 X0.0000 Y0.0000 Z0.0000
    G00 Z2.0000

    ;No. 1: Engraving 143
    G00 X6.3416 Y4.5620
    G00 Z-0.5000
    G01 Z-1.0100 F180 S24000
    G01 Y4.0000 F900
    G01 X9.0468 F900
    G01 Y4.4573 F900
    G01 X6.8981 Y4.4628 F900
    G01 X6.9775 Y4.5268 F900
    G01 X7.0565 Y4.5914 F900
    G01 X7.1351 Y4.6566 F900
    G01 X7.2132 Y4.7222 F900
    G01 X7.2908 Y4.7885 F900
    G01 X7.3680 Y4.8553 F900
    G01 X7.4446 Y4.9226 F900
    G01 X7.5208 Y4.9905 F900
    G01 X7.5966 Y5.0589 F900
    G01 X7.6718 Y5.1278 F900
    G01 X7.7465 Y5.1973 F900
    G01 X7.8208 Y5.2673 F900
    G01 X7.8946 Y5.3378 F900
    G01 X7.9678 Y5.4088 F900
    G01 X8.0406 Y5.4804 F900
    G01 X8.1128 Y5.5524 F900
    G01 X8.1846 Y5.6250 F900
    G01 X8.2558 Y5.6981 F900
    G01 X8.3265 Y5.7717 F900
    G01 X8.3967 Y5.8457 F900
    G01 X8.4659 Y5.9218 F900
    G01 X8.5306 Y6.0017 F900
    G01 X8.5906 Y6.0851 F900
    G01 X8.6458 Y6.1718 F900
    G01 X8.6959 Y6.2616 F900
    G01 X8.7408 Y6.3540 F900
    G01 X8.7804 Y6.4489 F900
    G01 X8.8145 Y6.5459 F900
    G01 X8.8430 Y6.6446 F900
    G01 X8.8640 Y6.7378 F900
    G01 X8.8776 Y6.8324 F900
    G01 X8.8837 Y6.9277 F900
    G01 X8.8822 Y7.0232 F900
    G01 X8.8732 Y7.1183 F900
    G01 X8.8566 Y7.2124 F900
    G01 X8.8327 Y7.3049 F900
    G01 X8.8015 Y7.3952 F900
    G01 X8.7633 Y7.4827 F900
    G01 X8.7182 Y7.5670 F900
    G01 X8.6667 Y7.6474 F900
    G01 X8.5966 Y7.7183 F900
    G01 X8.5215 Y7.7838 F900
    G01 X8.4419 Y7.8437 F900
    G01 X8.3580 Y7.8976 F900
    G01 X8.2704 Y7.9451 F900
    G01 X8.1795 Y7.9861 F900
    G01 X8.0859 Y8.0203 F900
    G01 X7.9900 Y8.0475 F900
    G01 X7.8924 Y8.0676 F900
    G01 X7.7936 Y8.0804 F900
    G01 X7.6941 Y8.0860 F900
    G01 X7.5944 Y8.0842 F900
    G01 X7.4954 Y8.0821 F900
    G01 X7.3964 Y8.0765 F900
    G01 X7.2978 Y8.0675 F900
    G01 X7.1995 Y8.0550 F900
    G01 X7.1017 Y8.0392 F900
    G01 X7.0045 Y8.0199 F900
    G01 X6.9081 Y7.9973 F900
    G01 X6.8125 Y7.9713 F900
    G01 X6.7178 Y7.9420 F900
    G01 X6.6242 Y7.9095 F900
    G01 X6.5319 Y7.8737 F900
    G01 X6.4408 Y7.8347 F900
    G01 Y7.2727 F900
    G01 X6.5219 Y7.3224 F900
    G01 X6.6050 Y7.3687 F900
    G01 X6.6899 Y7.4116 F900
    G01 X6.7764 Y7.4510 F900
    G01 X6.8645 Y7.4869 F900
    G01 X6.9540 Y7.5192 F900
    G01 X7.0446 Y7.5479 F900
    G01 X7.1364 Y7.5729 F900
    G01 X7.2291 Y7.5941 F900
    G01 X7.3253 Y7.6118 F900
    G01 X7.4225 Y7.6226 F900
    G01 X7.5202 Y7.6265 F900
    G01 X7.6179 Y7.6233 F900
    G01 X7.7152 Y7.6132 F900
    G01 X7.8115 Y7.5962 F900
    G01 X7.9063 Y7.5723 F900
    G01 X7.9542 Y7.5542 F900
    G01 X8.0005 Y7.5322 F900
    G01 X8.0448 Y7.5064 F900
    G01 X8.0868 Y7.4771 F900
    G01 X8.1263 Y7.4443 F900
    G01 X8.1629 Y7.4085 F900
    G01 X8.1964 Y7.3697 F900
    G01 X8.2265 Y7.3282 F900
    G01 X8.2531 Y7.2845 F900
    G01 X8.2761 Y7.2386 F900
    G01 X8.3017 Y7.1642 F900
    G01 X8.3205 Y7.0878 F900
    G01 X8.3324 Y7.0101 F900
    G01 X8.3373 Y6.9316 F900
    G01 X8.3351 Y6.8529 F900
    G01 X8.3258 Y6.7748 F900
    G01 X8.3096 Y6.6978 F900
    G01 X8.2865 Y6.6226 F900
    G01 X8.2495 Y6.5338 F900
    G01 X8.2087 Y6.4468 F900
    G01 X8.1640 Y6.3617 F900
    G01 X8.1155 Y6.2786 F900
    G01 X8.0634 Y6.1978 F900
    G01 X8.0078 Y6.1194 F900
    G01 X7.9487 Y6.0435 F900
    G01 X7.8863 Y5.9704 F900
    G01 X7.8207 Y5.9001 F900
    G01 X7.7520 Y5.8328 F900
    G01 X7.6804 Y5.7686 F900
    G01 X7.0138 Y5.1350 F900
    G01 X6.3416 Y4.5620 F900
    G00 Z2.0000 F2100

    ;No. 2: Engraving 144
    G00 X9.8843 Y6.1818 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X9.8952 Y5.6765 F900
    G01 X9.9449 Y5.1736 F900
    G01 X9.9623 Y5.0802 F900
    G01 X9.9836 Y4.9877 F900
    G01 X10.0089 Y4.8961 F900
    G01 X10.0380 Y4.8058 F900
    G01 X10.0710 Y4.7167 F900
    G01 X10.1078 Y4.6292 F900
    G01 X10.1483 Y4.5433 F900
    G01 X10.1924 Y4.4592 F900
    G01 X10.2488 Y4.3791 F900
    G01 X10.3116 Y4.3039 F900
    G01 X10.3803 Y4.2341 F900
    G01 X10.4544 Y4.1701 F900
    G01 X10.5335 Y4.1123 F900
    G01 X10.6171 Y4.0613 F900
    G01 X10.7046 Y4.0172 F900
    G01 X10.7954 Y3.9804 F900
    G01 X10.8888 Y3.9511 F900
    G01 X10.9844 Y3.9295 F900
    G01 X11.0814 Y3.9159 F900
    G01 X11.1791 Y3.9101 F900
    G01 X11.2771 Y3.9124 F900
    G01 X11.3794 Y3.9115 F900
    G01 X11.4815 Y3.9193 F900
    G01 X11.5825 Y3.9359 F900
    G01 X11.6817 Y3.9610 F900
    G01 X11.7784 Y3.9946 F900
    G01 X11.8719 Y4.0363 F900
    G01 X11.9615 Y4.0859 F900
    G01 X12.0465 Y4.1429 F900
    G01 X12.1263 Y4.2071 F900
    G01 X12.2003 Y4.2778 F900
    G01 X12.2679 Y4.3546 F900
    G01 X12.3288 Y4.4369 F900
    G01 X12.3823 Y4.5242 F900
    G01 X12.4282 Y4.6157 F900
    G01 X12.4661 Y4.7108 F900
    G01 X12.4957 Y4.8088 F900
    G01 X12.5224 Y4.9054 F900
    G01 X12.5468 Y5.0027 F900
    G01 X12.5688 Y5.1006 F900
    G01 X12.5884 Y5.1989 F900
    G01 X12.6056 Y5.2977 F900
    G01 X12.6204 Y5.3969 F900
    G01 X12.6328 Y5.4965 F900
    G01 X12.6428 Y5.5963 F900
    G01 X12.6503 Y5.6963 F900
    G01 X12.6555 Y5.7964 F900
    G01 X12.6582 Y5.8967 F900
    G01 X12.6584 Y5.9970 F900
    G01 X12.6563 Y6.0973 F900
    G01 X12.6517 Y6.1975 F900
    G01 X12.6446 Y6.2975 F900
    G01 X12.6171 Y6.6226 F900
    G01 X12.5620 Y6.9477 F900
    G01 X12.4793 Y7.2342 F900
    G01 X12.3365 Y7.5397 F900
    G01 X12.2792 Y7.6241 F900
    G01 X12.2144 Y7.7028 F900
    G01 X12.1428 Y7.7754 F900
    G01 X12.0648 Y7.8412 F900
    G01 X11.9812 Y7.8996 F900
    G01 X11.8926 Y7.9502 F900
    G01 X11.7998 Y7.9925 F900
    G01 X11.7036 Y8.0262 F900
    G01 X11.6047 Y8.0510 F900
    G01 X11.5015 Y8.0694 F900
    G01 X11.3973 Y8.0808 F900
    G01 X11.2926 Y8.0853 F900
    G01 X11.1879 Y8.0827 F900
    G01 X11.0835 Y8.0731 F900
    G01 X10.9800 Y8.0566 F900
    G01 X10.8779 Y8.0332 F900
    G01 X10.7775 Y8.0030 F900
    G01 X10.6794 Y7.9662 F900
    G01 X10.5840 Y7.9229 F900
    G01 X10.5048 Y7.8697 F900
    G01 X10.4299 Y7.8105 F900
    G01 X10.3599 Y7.7457 F900
    G01 X10.2952 Y7.6755 F900
    G01 X10.2362 Y7.6005 F900
    G01 X10.1833 Y7.5211 F900
    G01 X10.1367 Y7.4378 F900
    G01 X10.0968 Y7.3511 F900
    G01 X10.0640 Y7.2572 F900
    G01 X10.0338 Y7.1624 F900
    G01 X10.0064 Y7.0667 F900
    G01 X9.9816 Y6.9703 F900
    G01 X9.9597 Y6.8732 F900
    G01 X9.9405 Y6.7756 F900
    G01 X9.9241 Y6.6774 F900
    G01 X9.9105 Y6.5788 F900
    G01 X9.8997 Y6.4799 F900
    G01 X9.8917 Y6.3807 F900
    G01 X9.8866 Y6.2813 F900
    G01 X9.8843 Y6.1818 F900
    G00 Z2.0000 F2100

    ;No. 3: Engraving 145
    G00 X10.4242 Y6.1928 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y5.7686 F900
    G01 X10.4463 Y5.3499 F900
    G01 X10.4848 Y5.0854 F900
    G01 X10.5962 Y4.7412 F900
    G01 X10.6268 Y4.6862 F900
    G01 X10.6622 Y4.6341 F900
    G01 X10.7021 Y4.5853 F900
    G01 X10.7462 Y4.5403 F900
    G01 X10.7940 Y4.4994 F900
    G01 X10.8454 Y4.4629 F900
    G01 X10.8998 Y4.4311 F900
    G01 X10.9568 Y4.4043 F900
    G01 X11.0160 Y4.3827 F900
    G01 X11.0768 Y4.3664 F900
    G01 X11.1389 Y4.3556 F900
    G01 X11.2016 Y4.3504 F900
    G01 X11.2646 Y4.3508 F900
    G01 X11.3262 F900
    G01 X11.3876 Y4.3561 F900
    G01 X11.4483 Y4.3666 F900
    G01 X11.5079 Y4.3821 F900
    G01 X11.5660 Y4.4027 F900
    G01 X11.6221 Y4.4281 F900
    G01 X11.6758 Y4.4581 F900
    G01 X11.7269 Y4.4926 F900
    G01 X11.7748 Y4.5313 F900
    G01 X11.8193 Y4.5739 F900
    G01 X11.8600 Y4.6201 F900
    G01 X11.8967 Y4.6696 F900
    G01 X11.9290 Y4.7220 F900
    G01 X11.9568 Y4.7770 F900
    G01 X11.9798 Y4.8341 F900
    G01 X11.9979 Y4.8930 F900
    G01 X12.0110 Y4.9532 F900
    G01 X12.0316 Y5.0513 F900
    G01 X12.0500 Y5.1499 F900
    G01 X12.0662 Y5.2488 F900
    G01 X12.0801 Y5.3482 F900
    G01 X12.0918 Y5.4478 F900
    G01 X12.1012 Y5.5476 F900
    G01 X12.1084 Y5.6476 F900
    G01 X12.1133 Y5.7478 F900
    G01 X12.1159 Y5.8480 F900
    G01 X12.1163 Y5.9483 F900
    G01 X12.1144 Y6.0486 F900
    G01 X12.1102 Y6.1488 F900
    G01 X12.0716 Y6.7603 F900
    G01 X12.0331 Y6.9697 F900
    G01 X11.9441 Y7.2372 F900
    G01 X11.9102 Y7.2953 F900
    G01 X11.8714 Y7.3504 F900
    G01 X11.8280 Y7.4019 F900
    G01 X11.7803 Y7.4494 F900
    G01 X11.7287 Y7.4927 F900
    G01 X11.6735 Y7.5314 F900
    G01 X11.6152 Y7.5651 F900
    G01 X11.5543 Y7.5937 F900
    G01 X11.4911 Y7.6170 F900
    G01 X11.4261 Y7.6347 F900
    G01 X11.3598 Y7.6467 F900
    G01 X11.2928 Y7.6530 F900
    G01 X11.2254 Y7.6535 F900
    G01 X11.1583 Y7.6481 F900
    G01 X11.0918 Y7.6370 F900
    G01 X11.0266 Y7.6202 F900
    G01 X10.9631 Y7.5979 F900
    G01 X10.9017 Y7.5701 F900
    G01 X10.8430 Y7.5372 F900
    G01 X10.7809 Y7.4857 F900
    G01 X10.7239 Y7.4288 F900
    G01 X10.6723 Y7.3668 F900
    G01 X10.6267 Y7.3003 F900
    G01 X10.5874 Y7.2300 F900
    G01 X10.5547 Y7.1563 F900
    G01 X10.5289 Y7.0799 F900
    G01 X10.4524 Y6.6392 F900
    G01 X10.4242 Y6.1928 F900
    G00 Z2.0000 F2100

    ;No. 4: Engraving 146
    G00 X13.8733 Y7.4545 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y7.0964 F900
    G01 X14.7052 Y7.0909 F900
    G01 Y4.4077 F900
    G01 X13.8733 Y4.4022 F900
    G01 Y4.0000 F900
    G01 X16.0331 F900
    G01 Y4.4022 F900
    G01 X15.2176 Y4.4077 F900
    G01 Y8.0165 F900
    G01 X14.8044 F900
    G01 X14.8035 Y7.9727 F900
    G01 X14.7986 Y7.9291 F900
    G01 X14.7899 Y7.8862 F900
    G01 X14.7773 Y7.8442 F900
    G01 X14.7609 Y7.8035 F900
    G01 X14.7409 Y7.7644 F900
    G01 X14.7175 Y7.7274 F900
    G01 X14.6909 Y7.6925 F900
    G01 X14.6612 Y7.6603 F900
    G01 X14.6287 Y7.6308 F900
    G01 X14.5937 Y7.6044 F900
    G01 X14.5565 Y7.5813 F900
    G01 X14.4641 Y7.5422 F900
    G01 X14.3691 Y7.5098 F900
    G01 X14.2721 Y7.4845 F900
    G01 X14.1735 Y7.4662 F900
    G01 X14.0738 Y7.4550 F900
    G01 X13.9735 Y7.4512 F900
    G01 X13.8733 Y7.4545 F900
    G00 Z2.0000 F2100

    ;No. 5: Engraving 147
    G00 X17.1019 Y5.9174 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X17.0978 Y5.8172 F900
    G01 X17.0971 Y5.7170 F900
    G01 X17.0997 Y5.6168 F900
    G01 X17.1057 Y5.5167 F900
    G01 X17.1151 Y5.4169 F900
    G01 X17.1277 Y5.3175 F900
    G01 X17.1437 Y5.2185 F900
    G01 X17.1630 Y5.1202 F900
    G01 X17.1856 Y5.0225 F900
    G01 X17.2115 Y4.9257 F900
    G01 X17.2562 Y4.7824 F900
    G01 X17.2937 Y4.6925 F900
    G01 X17.3374 Y4.6054 F900
    G01 X17.3871 Y4.5217 F900
    G01 X17.4426 Y4.4416 F900
    G01 X17.5036 Y4.3657 F900
    G01 X17.5698 Y4.2942 F900
    G01 X17.6408 Y4.2276 F900
    G01 X17.7164 Y4.1662 F900
    G01 X17.7961 Y4.1102 F900
    G01 X17.8826 Y4.0636 F900
    G01 X17.9719 Y4.0229 F900
    G01 X18.0638 Y3.9883 F900
    G01 X18.1578 Y3.9599 F900
    G01 X18.2535 Y3.9378 F900
    G01 X18.3505 Y3.9223 F900
    G01 X18.4482 Y3.9133 F900
    G01 X18.5464 Y3.9108 F900
    G01 X18.6445 Y3.9149 F900
    G01 X18.7421 Y3.9256 F900
    G01 X18.8388 Y3.9429 F900
    G01 X18.9341 Y3.9665 F900
    G01 X19.0276 Y3.9965 F900
    G01 X19.1189 Y4.0327 F900
    G01 X19.2075 Y4.0750 F900
    G01 X19.2931 Y4.1230 F900
    G01 X19.3753 Y4.1768 F900
    G01 X19.4537 Y4.2359 F900
    G01 X19.5280 Y4.3001 F900
    G01 X19.5978 Y4.3691 F900
    G01 X19.6592 Y4.4443 F900
    G01 X19.7150 Y4.5237 F900
    G01 X19.7650 Y4.6068 F900
    G01 X19.8089 Y4.6934 F900
    G01 X19.8466 Y4.7828 F900
    G01 X19.8777 Y4.8747 F900
    G01 X19.9022 Y4.9686 F900
    G01 X19.9199 Y5.0640 F900
    G01 X19.9308 Y5.1604 F900
    G01 X19.9347 Y5.2574 F900
    G01 X19.9387 Y5.3575 F900
    G01 X19.9346 Y5.4575 F900
    G01 X19.9224 Y5.5569 F900
    G01 X19.9021 Y5.6550 F900
    G01 X19.8738 Y5.7511 F900
    G01 X19.8379 Y5.8446 F900
    G01 X19.7944 Y5.9348 F900
    G01 X19.7438 Y6.0212 F900
    G01 X19.6863 Y6.1032 F900
    G01 X19.6223 Y6.1803 F900
    G01 X19.5489 Y6.2490 F900
    G01 X19.4701 Y6.3116 F900
    G01 X19.3866 Y6.3676 F900
    G01 X19.2988 Y6.4167 F900
    G01 X19.2073 Y6.4586 F900
    G01 X19.1127 Y6.4929 F900
    G01 X19.0157 Y6.5194 F900
    G01 X18.9169 Y6.5380 F900
    G01 X18.8168 Y6.5486 F900
    G01 X18.7158 Y6.5560 F900
    G01 X18.6145 Y6.5579 F900
    G01 X18.5133 Y6.5543 F900
    G01 X18.4124 Y6.5452 F900
    G01 X18.3121 Y6.5306 F900
    G01 X18.2128 Y6.5106 F900
    G01 X18.1148 Y6.4852 F900
    G01 X18.0182 Y6.4546 F900
    G01 X17.9235 Y6.4187 F900
    G01 X17.8308 Y6.3777 F900
    G01 X17.7405 Y6.3318 F900
    G01 X17.6529 Y6.2810 F900
    G01 X17.6589 Y6.3781 F900
    G01 X17.6714 Y6.4746 F900
    G01 X17.6903 Y6.5700 F900
    G01 X17.7154 Y6.6640 F900
    G01 X17.7467 Y6.7562 F900
    G01 X17.7841 Y6.8460 F900
    G01 X17.8273 Y6.9332 F900
    G01 X17.8762 Y7.0173 F900
    G01 X17.9306 Y7.0979 F900
    G01 X17.9902 Y7.1748 F900
    G01 X18.0548 Y7.2476 F900
    G01 X18.1241 Y7.3159 F900
    G01 X18.1978 Y7.3795 F900
    G01 X18.2755 Y7.4380 F900
    G01 X18.3653 Y7.4846 F900
    G01 X18.4582 Y7.5246 F900
    G01 X18.5536 Y7.5580 F900
    G01 X18.6512 Y7.5845 F900
    G01 X18.7505 Y7.6040 F900
    G01 X18.8509 Y7.6164 F900
    G01 X18.9519 Y7.6217 F900
    G01 X19.0530 Y7.6198 F900
    G01 X19.1537 Y7.6107 F900
    G01 X19.2536 Y7.5945 F900
    G01 X19.3520 Y7.5713 F900
    G01 X19.4485 Y7.5411 F900
    G01 X19.5427 Y7.5041 F900
    G01 Y8.0165 F900
    G01 X19.3554 Y8.0606 F900
    G01 X19.0471 Y8.0793 F900
    G01 X18.9489 Y8.0808 F900
    G01 X18.8508 Y8.0771 F900
    G01 X18.7530 Y8.0681 F900
    G01 X18.6559 Y8.0538 F900
    G01 X18.5596 Y8.0344 F900
    G01 X18.4645 Y8.0098 F900
    G01 X18.3709 Y7.9802 F900
    G01 X18.2790 Y7.9456 F900
    G01 X18.1891 Y7.9061 F900
    G01 X18.1014 Y7.8618 F900
    G01 X18.0163 Y7.8129 F900
    G01 X17.9339 Y7.7595 F900
    G01 X17.8545 Y7.7018 F900
    G01 X17.7783 Y7.6398 F900
    G01 X17.7055 Y7.5739 F900
    G01 X17.6364 Y7.5041 F900
    G01 X17.5763 Y7.4243 F900
    G01 X17.5195 Y7.3421 F900
    G01 X17.4661 Y7.2577 F900
    G01 X17.4160 Y7.1713 F900
    G01 X17.3693 Y7.0830 F900
    G01 X17.3263 Y6.9928 F900
    G01 X17.2868 Y6.9011 F900
    G01 X17.2510 Y6.8078 F900
    G01 X17.2190 Y6.7132 F900
    G01 X17.1907 Y6.6174 F900
    G01 X17.1663 Y6.5205 F900
    G01 X17.1457 Y6.4228 F900
    G01 X17.1290 Y6.3243 F900
    G01 X17.1163 Y6.2252 F900
    G01 X17.1075 Y6.1257 F900
    G01 X17.1027 Y6.0259 F900
    G01 X17.1019 Y5.9174 F900
    G00 Z2.0000 F2100

    ;No. 6: Engraving 148
    G00 X17.6419 Y5.8127 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y5.4490 F900
    G01 X17.6694 Y5.1901 F900
    G01 X17.7245 Y4.9697 F900
    G01 X17.8407 Y4.7314 F900
    G01 X17.8862 Y4.6687 F900
    G01 X17.9372 Y4.6103 F900
    G01 X17.9934 Y4.5568 F900
    G01 X18.0541 Y4.5087 F900
    G01 X18.1190 Y4.4663 F900
    G01 X18.1875 Y4.4299 F900
    G01 X18.2591 Y4.4000 F900
    G01 X18.3330 Y4.3767 F900
    G01 X18.4088 Y4.3602 F900
    G01 X18.4857 Y4.3507 F900
    G01 X18.5632 Y4.3483 F900
    G01 X18.6329 Y4.3482 F900
    G01 X18.7022 Y4.3544 F900
    G01 X18.7708 Y4.3666 F900
    G01 X18.8380 Y4.3849 F900
    G01 X18.9033 Y4.4091 F900
    G01 X18.9662 Y4.4389 F900
    G01 X19.0262 Y4.4743 F900
    G01 X19.0828 Y4.5148 F900
    G01 X19.1357 Y4.5602 F900
    G01 X19.1842 Y4.6101 F900
    G01 X19.2282 Y4.6641 F900
    G01 X19.2672 Y4.7218 F900
    G01 X19.3076 Y4.8093 F900
    G01 X19.3406 Y4.8999 F900
    G01 X19.3661 Y4.9928 F900
    G01 X19.3839 Y5.0876 F900
    G01 X19.3938 Y5.1835 F900
    G01 X19.3959 Y5.2798 F900
    G01 X19.3901 Y5.3761 F900
    G01 X19.3764 Y5.4715 F900
    G01 X19.3549 Y5.5655 F900
    G01 X19.3258 Y5.6574 F900
    G01 X19.2893 Y5.7466 F900
    G01 X19.2508 Y5.8021 F900
    G01 X19.2077 Y5.8543 F900
    G01 X19.1603 Y5.9025 F900
    G01 X19.1090 Y5.9465 F900
    G01 X19.0541 Y5.9860 F900
    G01 X18.9960 Y6.0206 F900
    G01 X18.9352 Y6.0502 F900
    G01 X18.8721 Y6.0745 F900
    G01 X18.8072 Y6.0933 F900
    G01 X18.7409 Y6.1065 F900
    G01 X18.6737 Y6.1140 F900
    G01 X18.6061 Y6.1157 F900
    G01 X18.3204 Y6.1077 F900
    G01 X17.9835 Y6.0441 F900
    G01 X17.6584 Y5.9008 F900
    G01 X17.6419 Y5.8127 F900
    G00 Z2.0000 F2100

    ;No. 7: Engraving 149
    G00 X21.9339 Y6.0937 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X21.9279 Y5.9941 F900
    G01 X21.9262 Y5.8943 F900
    G01 X21.9290 Y5.7946 F900
    G01 X21.9361 Y5.6950 F900
    G01 X21.9476 Y5.5959 F900
    G01 X21.9634 Y5.4974 F900
    G01 X21.9836 Y5.3997 F900
    G01 X22.0081 Y5.3030 F900
    G01 X22.0367 Y5.2074 F900
    G01 X22.0696 Y5.1132 F900
    G01 X22.1065 Y5.0205 F900
    G01 X22.1476 Y4.9295 F900
    G01 X22.1925 Y4.8405 F900
    G01 X22.2414 Y4.7535 F900
    G01 X22.2940 Y4.6687 F900
    G01 X22.3988 Y4.5210 F900
    G01 X22.4717 Y4.4482 F900
    G01 X22.5484 Y4.3795 F900
    G01 X22.6286 Y4.3150 F900
    G01 X22.7122 Y4.2549 F900
    G01 X22.7989 Y4.1993 F900
    G01 X22.8885 Y4.1486 F900
    G01 X22.9806 Y4.1027 F900
    G01 X23.0751 Y4.0618 F900
    G01 X23.1717 Y4.0261 F900
    G01 X23.2701 Y3.9956 F900
    G01 X23.3699 Y3.9704 F900
    G01 X23.4709 Y3.9507 F900
    G01 X23.5729 Y3.9364 F900
    G01 X23.6755 Y3.9276 F900
    G01 X23.7784 Y3.9243 F900
    G01 X23.8813 Y3.9266 F900
    G01 X23.9829 Y3.9308 F900
    G01 X24.0843 Y3.9384 F900
    G01 X24.1854 Y3.9494 F900
    G01 X24.2860 Y3.9637 F900
    G01 X24.3861 Y3.9814 F900
    G01 X24.4856 Y4.0024 F900
    G01 X24.5843 Y4.0267 F900
    G01 X24.6822 Y4.0543 F900
    G01 X24.7791 Y4.0851 F900
    G01 X24.8749 Y4.1191 F900
    G01 X24.9695 Y4.1563 F900
    G01 X25.0628 Y4.1967 F900
    G01 X25.1547 Y4.2401 F900
    G01 X25.2452 Y4.2865 F900
    G01 X25.2507 Y4.9091 F900
    G01 X25.2066 Y4.9036 F900
    G01 X24.9146 Y4.6777 F900
    G01 X24.6667 Y4.5455 F900
    G01 X24.4077 Y4.4518 F900
    G01 X24.1160 Y4.3937 F900
    G01 X24.0208 Y4.3836 F900
    G01 X23.9252 Y4.3792 F900
    G01 X23.8295 Y4.3807 F900
    G01 X23.7340 Y4.3878 F900
    G01 X23.6392 Y4.4008 F900
    G01 X23.5453 Y4.4194 F900
    G01 X23.4527 Y4.4437 F900
    G01 X23.3617 Y4.4735 F900
    G01 X23.2727 Y4.5088 F900
    G01 X23.1860 Y4.5493 F900
    G01 X23.1019 Y4.5950 F900
    G01 X23.0253 Y4.6552 F900
    G01 X22.9528 Y4.7204 F900
    G01 X22.8848 Y4.7902 F900
    G01 X22.8217 Y4.8645 F900
    G01 X22.7636 Y4.9427 F900
    G01 X22.7108 Y5.0247 F900
    G01 X22.6636 Y5.1099 F900
    G01 X22.6222 Y5.1982 F900
    G01 X22.5868 Y5.2889 F900
    G01 X22.5575 Y5.3819 F900
    G01 X22.5344 Y5.4766 F900
    G01 X22.5157 Y5.5748 F900
    G01 X22.5009 Y5.6736 F900
    G01 X22.4902 Y5.7730 F900
    G01 X22.4834 Y5.8728 F900
    G01 X22.4807 Y5.9727 F900
    G01 X22.4821 Y6.0726 F900
    G01 X22.4875 Y6.1724 F900
    G01 X22.4970 Y6.2720 F900
    G01 X22.5104 Y6.3710 F900
    G01 X22.5279 Y6.4694 F900
    G01 X22.5493 Y6.5671 F900
    G01 X22.5746 Y6.6638 F900
    G01 X22.6116 Y6.7824 F900
    G01 X22.6489 Y6.8754 F900
    G01 X22.6935 Y6.9651 F900
    G01 X22.7451 Y7.0511 F900
    G01 X22.8033 Y7.1327 F900
    G01 X22.8678 Y7.2094 F900
    G01 X22.9381 Y7.2808 F900
    G01 X23.0139 Y7.3465 F900
    G01 X23.0946 Y7.4059 F900
    G01 X23.1798 Y7.4587 F900
    G01 X23.2689 Y7.5047 F900
    G01 X23.3613 Y7.5434 F900
    G01 X23.4565 Y7.5747 F900
    G01 X23.5539 Y7.5984 F900
    G01 X23.6529 Y7.6143 F900
    G01 X23.7514 Y7.6212 F900
    G01 X23.8501 Y7.6235 F900
    G01 X23.9489 Y7.6213 F900
    G01 X24.0474 Y7.6145 F900
    G01 X24.1455 Y7.6033 F900
    G01 X24.2430 Y7.5875 F900
    G01 X24.3396 Y7.5673 F900
    G01 X24.4353 Y7.5427 F900
    G01 X24.6281 Y7.4711 F900
    G01 X24.8044 Y7.3829 F900
    G01 X25.0138 Y7.2507 F900
    G01 X25.2121 Y7.0964 F900
    G01 X25.2507 F900
    G01 Y7.7245 F900
    G01 X25.1616 Y7.7733 F900
    G01 X25.0707 Y7.8186 F900
    G01 X24.9781 Y7.8604 F900
    G01 X24.8840 Y7.8985 F900
    G01 X24.7885 Y7.9329 F900
    G01 X24.6917 Y7.9637 F900
    G01 X24.5938 Y7.9906 F900
    G01 X24.4949 Y8.0137 F900
    G01 X24.3952 Y8.0330 F900
    G01 X24.2948 Y8.0484 F900
    G01 X24.1939 Y8.0599 F900
    G01 X24.0926 Y8.0675 F900
    G01 X23.9911 Y8.0712 F900
    G01 X23.8895 Y8.0709 F900
    G01 X23.7881 Y8.0667 F900
    G01 X23.6868 Y8.0585 F900
    G01 X23.5860 Y8.0465 F900
    G01 X23.4857 Y8.0305 F900
    G01 X23.3861 Y8.0107 F900
    G01 X23.2874 Y7.9870 F900
    G01 X23.1896 Y7.9595 F900
    G01 X23.0930 Y7.9282 F900
    G01 X22.9976 Y7.8932 F900
    G01 X22.9037 Y7.8546 F900
    G01 X22.8168 Y7.8069 F900
    G01 X22.7329 Y7.7541 F900
    G01 X22.6523 Y7.6964 F900
    G01 X22.5754 Y7.6339 F900
    G01 X22.5023 Y7.5670 F900
    G01 X22.4334 Y7.4957 F900
    G01 X22.3688 Y7.4205 F900
    G01 X22.3089 Y7.3415 F900
    G01 X22.2539 Y7.2591 F900
    G01 X22.2039 Y7.1736 F900
    G01 X22.1599 Y7.0815 F900
    G01 X22.1197 Y6.9877 F900
    G01 X22.0833 Y6.8924 F900
    G01 X22.0507 Y6.7958 F900
    G01 X22.0221 Y6.6979 F900
    G01 X21.9973 Y6.5989 F900
    G01 X21.9766 Y6.4990 F900
    G01 X21.9598 Y6.3984 F900
    G01 X21.9471 Y6.2972 F900
    G01 X21.9385 Y6.1956 F900
    G01 X21.9339 Y6.0937 F900
    G00 Z2.0000 F2100

    ;No. 8: Engraving 150
    G00 X26.0882 Y8.1818 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y4.0000 F900
    G01 X26.5895 F900
    G01 Y6.2424 F900
    G01 X26.6640 Y6.3015 F900
    G01 X26.7419 Y6.3560 F900
    G01 X26.8229 Y6.4058 F900
    G01 X26.9067 Y6.4507 F900
    G01 X26.9930 Y6.4905 F900
    G01 X27.0816 Y6.5250 F900
    G01 X27.1720 Y6.5542 F900
    G01 X27.2641 Y6.5780 F900
    G01 X27.3574 Y6.5962 F900
    G01 X27.4516 Y6.6089 F900
    G01 X27.4971 Y6.6149 F900
    G01 X27.5429 Y6.6169 F900
    G01 X27.5888 Y6.6149 F900
    G01 X27.6343 Y6.6089 F900
    G01 X27.6791 Y6.5989 F900
    G01 X27.7229 Y6.5851 F900
    G01 X27.7653 Y6.5675 F900
    G01 X27.8060 Y6.5463 F900
    G01 X27.8446 Y6.5216 F900
    G01 X27.8810 Y6.4937 F900
    G01 X27.9148 Y6.4626 F900
    G01 X27.9458 Y6.4287 F900
    G01 X27.9737 Y6.3923 F900
    G01 X27.9983 Y6.3535 F900
    G01 X28.0194 Y6.3128 F900
    G01 X28.0369 Y6.2704 F900
    G01 X28.0506 Y6.2266 F900
    G01 X28.0882 Y5.9780 F900
    G01 X28.0992 Y5.7576 F900
    G01 Y4.0000 F900
    G01 X28.5950 F900
    G01 Y6.0882 F900
    G01 X28.5863 Y6.1865 F900
    G01 X28.5706 Y6.2840 F900
    G01 X28.5480 Y6.3801 F900
    G01 X28.5188 Y6.4744 F900
    G01 X28.4830 Y6.5664 F900
    G01 X28.4408 Y6.6556 F900
    G01 X28.3962 Y6.7216 F900
    G01 X28.3459 Y6.7834 F900
    G01 X28.2904 Y6.8406 F900
    G01 X28.2301 Y6.8926 F900
    G01 X28.1654 Y6.9391 F900
    G01 X28.0969 Y6.9797 F900
    G01 X28.0250 Y7.0141 F900
    G01 X27.9504 Y7.0420 F900
    G01 X27.8737 Y7.0632 F900
    G01 X27.7953 Y7.0776 F900
    G01 X27.7160 Y7.0850 F900
    G01 X27.6364 Y7.0854 F900
    G01 X27.5323 Y7.0796 F900
    G01 X27.4288 Y7.0669 F900
    G01 X27.3264 Y7.0476 F900
    G01 X27.2254 Y7.0216 F900
    G01 X27.1264 Y6.9891 F900
    G01 X27.0297 Y6.9503 F900
    G01 X26.9357 Y6.9051 F900
    G01 X26.8449 Y6.8540 F900
    G01 X26.7576 Y6.7970 F900
    G01 X26.6742 Y6.7345 F900
    G01 X26.5950 Y6.6667 F900
    G01 X26.5895 Y8.1818 F900
    G01 X26.0882 F900
    G00 Z2.0000 F2100

    ;No. 9: Engraving 151
    G00 X29.4656 Y4.9642 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X29.4597 Y4.8827 F900
    G01 X29.4610 Y4.8010 F900
    G01 X29.4693 Y4.7198 F900
    G01 X29.4847 Y4.6396 F900
    G01 X29.5070 Y4.5610 F900
    G01 X29.5361 Y4.4847 F900
    G01 X29.5718 Y4.4112 F900
    G01 X29.6136 Y4.3410 F900
    G01 X29.6615 Y4.2748 F900
    G01 X29.7149 Y4.2130 F900
    G01 X29.7735 Y4.1561 F900
    G01 X29.8368 Y4.1045 F900
    G01 X29.9044 Y4.0587 F900
    G01 X29.9757 Y4.0188 F900
    G01 X30.0551 Y3.9835 F900
    G01 X30.1494 Y3.9576 F900
    G01 X30.2452 Y3.9381 F900
    G01 X30.3420 Y3.9249 F900
    G01 X30.4395 Y3.9181 F900
    G01 X30.5373 Y3.9177 F900
    G01 X30.6349 Y3.9238 F900
    G01 X30.7318 Y3.9363 F900
    G01 X30.8277 Y3.9551 F900
    G01 X30.9222 Y3.9803 F900
    G01 X31.0148 Y4.0116 F900
    G01 X31.1052 Y4.0489 F900
    G01 X31.1929 Y4.0921 F900
    G01 X31.2775 Y4.1410 F900
    G01 X31.3588 Y4.1954 F900
    G01 X31.4362 Y4.2550 F900
    G01 X31.5096 Y4.3196 F900
    G01 X31.5152 Y4.0000 F900
    G01 X32.0110 F900
    G01 Y6.1433 F900
    G01 X31.9835 Y6.3471 F900
    G01 X31.9394 Y6.4904 F900
    G01 X31.9052 Y6.5627 F900
    G01 X31.8644 Y6.6315 F900
    G01 X31.8174 Y6.6963 F900
    G01 X31.7645 Y6.7564 F900
    G01 X31.7063 Y6.8112 F900
    G01 X31.6432 Y6.8605 F900
    G01 X31.5758 Y6.9036 F900
    G01 X31.4832 Y6.9437 F900
    G01 X31.3885 Y6.9787 F900
    G01 X31.2921 Y7.0083 F900
    G01 X31.1941 Y7.0326 F900
    G01 X31.0949 Y7.0514 F900
    G01 X30.9949 Y7.0646 F900
    G01 X30.8943 Y7.0723 F900
    G01 X30.7934 Y7.0744 F900
    G01 X30.6956 Y7.0737 F900
    G01 X30.5979 Y7.0706 F900
    G01 X30.5003 Y7.0651 F900
    G01 X30.4028 Y7.0573 F900
    G01 X30.3056 Y7.0471 F900
    G01 X30.2087 Y7.0345 F900
    G01 X30.1120 Y7.0196 F900
    G01 X30.0158 Y7.0023 F900
    G01 X29.9200 Y6.9828 F900
    G01 X29.8247 Y6.9609 F900
    G01 X29.7300 Y6.9366 F900
    G01 Y6.4298 F900
    G01 X29.8248 Y6.4682 F900
    G01 X29.9212 Y6.5026 F900
    G01 X30.0189 Y6.5330 F900
    G01 X30.1177 Y6.5593 F900
    G01 X30.2176 Y6.5815 F900
    G01 X30.3183 Y6.5994 F900
    G01 X30.4197 Y6.6131 F900
    G01 X30.5216 Y6.6226 F900
    G01 X30.6238 Y6.6278 F900
    G01 X30.7261 Y6.6287 F900
    G01 X30.8283 Y6.6254 F900
    G01 X30.9304 Y6.6178 F900
    G01 X31.0320 Y6.6059 F900
    G01 X31.1330 Y6.5898 F900
    G01 X31.1772 Y6.5758 F900
    G01 X31.2200 Y6.5580 F900
    G01 X31.2610 Y6.5366 F900
    G01 X31.3000 Y6.5116 F900
    G01 X31.3367 Y6.4833 F900
    G01 X31.3707 Y6.4519 F900
    G01 X31.4019 Y6.4176 F900
    G01 X31.4299 Y6.3807 F900
    G01 X31.4546 Y6.3415 F900
    G01 X31.4758 Y6.3003 F900
    G01 X31.4932 Y6.2574 F900
    G01 X31.5069 Y6.2132 F900
    G01 X31.5166 Y6.1679 F900
    G01 X31.5223 Y6.1219 F900
    G01 X31.5240 Y6.0756 F900
    G01 X31.5216 Y6.0293 F900
    G01 X31.5152 Y5.9835 F900
    G01 X31.0193 Y5.9504 F900
    G01 X30.5367 Y5.8977 F900
    G01 X30.2242 Y5.8230 F900
    G01 X29.9737 Y5.7292 F900
    G01 X29.9072 Y5.6957 F900
    G01 X29.8438 Y5.6566 F900
    G01 X29.7840 Y5.6122 F900
    G01 X29.7283 Y5.5627 F900
    G01 X29.6771 Y5.5087 F900
    G01 X29.6307 Y5.4505 F900
    G01 X29.5895 Y5.3884 F900
    G01 X29.5538 Y5.3231 F900
    G01 X29.5238 Y5.2549 F900
    G01 X29.4999 Y5.1844 F900
    G01 X29.4821 Y5.1121 F900
    G01 X29.4707 Y5.0385 F900
    G01 X29.4656 Y4.9642 F900
    G00 Z2.0000 F2100

    ;No. 10: Engraving 152
    G00 X29.9835 Y4.9862 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X29.9782 Y4.9382 F900
    G01 X29.9771 Y4.8899 F900
    G01 X29.9802 Y4.8417 F900
    G01 X29.9875 Y4.7940 F900
    G01 X29.9990 Y4.7471 F900
    G01 X30.0146 Y4.7013 F900
    G01 X30.0341 Y4.6571 F900
    G01 X30.0574 Y4.6148 F900
    G01 X30.0843 Y4.5747 F900
    G01 X30.1377 Y4.5124 F900
    G01 X30.1986 Y4.4767 F900
    G01 X30.2622 Y4.4463 F900
    G01 X30.3283 Y4.4215 F900
    G01 X30.3961 Y4.4023 F900
    G01 X30.4654 Y4.3890 F900
    G01 X30.5355 Y4.3816 F900
    G01 X30.6061 Y4.3802 F900
    G01 X30.7057 Y4.3856 F900
    G01 X30.8047 Y4.3981 F900
    G01 X30.9026 Y4.4176 F900
    G01 X30.9988 Y4.4441 F900
    G01 X31.0929 Y4.4773 F900
    G01 X31.1844 Y4.5172 F900
    G01 X31.2728 Y4.5634 F900
    G01 X31.3577 Y4.6159 F900
    G01 X31.4386 Y4.6743 F900
    G01 X31.5152 Y4.7383 F900
    G01 X31.5096 Y5.5758 F900
    G01 X31.4134 Y5.5764 F900
    G01 X31.3173 Y5.5746 F900
    G01 X31.2212 Y5.5704 F900
    G01 X31.1252 Y5.5639 F900
    G01 X31.0294 Y5.5550 F900
    G01 X30.9339 Y5.5437 F900
    G01 X30.8386 Y5.5301 F900
    G01 X30.7438 Y5.5142 F900
    G01 X30.6493 Y5.4958 F900
    G01 X30.5554 Y5.4752 F900
    G01 X30.4620 Y5.4523 F900
    G01 X30.3691 Y5.4270 F900
    G01 X30.3237 Y5.4123 F900
    G01 X30.2798 Y5.3937 F900
    G01 X30.2378 Y5.3711 F900
    G01 X30.1979 Y5.3449 F900
    G01 X30.1606 Y5.3152 F900
    G01 X30.1261 Y5.2823 F900
    G01 X30.0947 Y5.2464 F900
    G01 X30.0666 Y5.2078 F900
    G01 X30.0421 Y5.1668 F900
    G01 X30.0214 Y5.1238 F900
    G01 X30.0046 Y5.0792 F900
    G01 X29.9920 Y5.0332 F900
    G01 X29.9835 Y4.9862 F900
    G00 Z2.0000 F2100

    ;No. 11: Engraving 153
    G00 X33.0909 Y7.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y4.0000 F900
    G01 X33.5923 F900
    G01 Y6.2424 F900
    G01 X33.6714 Y6.3069 F900
    G01 X33.7546 Y6.3661 F900
    G01 X33.8416 Y6.4195 F900
    G01 X33.9319 Y6.4671 F900
    G01 X34.0252 Y6.5085 F900
    G01 X34.1210 Y6.5436 F900
    G01 X34.2190 Y6.5723 F900
    G01 X34.3187 Y6.5944 F900
    G01 X34.4196 Y6.6098 F900
    G01 X34.4628 Y6.6159 F900
    G01 X34.5064 Y6.6181 F900
    G01 X34.5500 Y6.6166 F900
    G01 X34.5934 Y6.6112 F900
    G01 X34.6361 Y6.6020 F900
    G01 X34.6778 Y6.5891 F900
    G01 X34.7182 Y6.5726 F900
    G01 X34.7570 Y6.5527 F900
    G01 X34.7939 Y6.5294 F900
    G01 X34.8287 Y6.5029 F900
    G01 X34.8610 Y6.4735 F900
    G01 X34.8906 Y6.4414 F900
    G01 X34.9172 Y6.4068 F900
    G01 X34.9407 Y6.3701 F900
    G01 X34.9609 Y6.3313 F900
    G01 X34.9777 Y6.2910 F900
    G01 X34.9908 Y6.2494 F900
    G01 X35.0002 Y6.2067 F900
    G01 X35.0303 Y5.9118 F900
    G01 Y4.0000 F900
    G01 X35.5317 F900
    G01 Y6.0496 F900
    G01 X35.5152 Y6.2259 F900
    G01 X35.5949 Y6.2937 F900
    G01 X35.6792 Y6.3558 F900
    G01 X35.7675 Y6.4119 F900
    G01 X35.8596 Y6.4618 F900
    G01 X35.9548 Y6.5052 F900
    G01 X36.0529 Y6.5418 F900
    G01 X36.1533 Y6.5715 F900
    G01 X36.2554 Y6.5942 F900
    G01 X36.3590 Y6.6098 F900
    G01 X36.4010 Y6.6158 F900
    G01 X36.4435 Y6.6181 F900
    G01 X36.4859 Y6.6169 F900
    G01 X36.5282 Y6.6120 F900
    G01 X36.5698 Y6.6035 F900
    G01 X36.6106 Y6.5915 F900
    G01 X36.6502 Y6.5761 F900
    G01 X36.6883 Y6.5573 F900
    G01 X36.7247 Y6.5354 F900
    G01 X36.7591 Y6.5104 F900
    G01 X36.7912 Y6.4826 F900
    G01 X36.8209 Y6.4522 F900
    G01 X36.8478 Y6.4193 F900
    G01 X36.8719 Y6.3843 F900
    G01 X36.8929 Y6.3473 F900
    G01 X36.9106 Y6.3087 F900
    G01 X36.9250 Y6.2687 F900
    G01 X36.9359 Y6.2276 F900
    G01 X36.9697 Y5.9118 F900
    G01 Y4.0000 F900
    G01 X37.4711 F900
    G01 Y6.0826 F900
    G01 X37.4601 Y6.2039 F900
    G01 X37.4534 Y6.2861 F900
    G01 X37.4398 Y6.3675 F900
    G01 X37.4193 Y6.4474 F900
    G01 X37.3920 Y6.5253 F900
    G01 X37.3583 Y6.6006 F900
    G01 X37.3183 Y6.6728 F900
    G01 X37.2723 Y6.7413 F900
    G01 X37.2207 Y6.8057 F900
    G01 X37.1637 Y6.8654 F900
    G01 X37.1019 Y6.9201 F900
    G01 X37.0176 Y6.9675 F900
    G01 X36.9295 Y7.0076 F900
    G01 X36.8383 Y7.0399 F900
    G01 X36.7447 Y7.0644 F900
    G01 X36.6493 Y7.0807 F900
    G01 X36.5529 Y7.0888 F900
    G01 X36.4562 Y7.0886 F900
    G01 X36.3598 Y7.0801 F900
    G01 X36.2645 Y7.0634 F900
    G01 X36.1694 Y7.0375 F900
    G01 X36.0758 Y7.0067 F900
    G01 X35.9840 Y6.9711 F900
    G01 X35.8941 Y6.9306 F900
    G01 X35.8066 Y6.8856 F900
    G01 X35.7215 Y6.8359 F900
    G01 X35.6391 Y6.7819 F900
    G01 X35.5596 Y6.7237 F900
    G01 X35.4834 Y6.6613 F900
    G01 X35.4105 Y6.5950 F900
    G01 X35.3788 Y6.6575 F900
    G01 X35.3419 Y6.7170 F900
    G01 X35.3002 Y6.7732 F900
    G01 X35.2537 Y6.8256 F900
    G01 X35.2030 Y6.8739 F900
    G01 X35.1484 Y6.9177 F900
    G01 X35.0902 Y6.9566 F900
    G01 X35.0290 Y6.9905 F900
    G01 X34.9650 Y7.0191 F900
    G01 X34.8989 Y7.0421 F900
    G01 X34.8311 Y7.0594 F900
    G01 X34.7375 Y7.0743 F900
    G01 X34.6431 Y7.0823 F900
    G01 X34.5484 Y7.0834 F900
    G01 X34.4539 Y7.0776 F900
    G01 X34.3600 Y7.0650 F900
    G01 X34.2673 Y7.0455 F900
    G01 X34.1763 Y7.0193 F900
    G01 X33.8731 Y6.8659 F900
    G01 X33.5978 Y6.6667 F900
    G01 X33.5923 Y7.0028 F900
    G01 X33.0909 F900
    G00 Z2.0000 F2100

    ;No. 12: Engraving 154
    G00 X38.6116 Y7.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y2.8926 F900
    G01 X39.1129 F900
    G01 Y4.1433 F900
    G01 X39.2047 Y4.0967 F900
    G01 X39.2991 Y4.0560 F900
    G01 X39.3959 Y4.0211 F900
    G01 X39.4946 Y3.9923 F900
    G01 X39.5949 Y3.9696 F900
    G01 X39.6964 Y3.9532 F900
    G01 X39.7988 Y3.9430 F900
    G01 X39.9016 Y3.9392 F900
    G01 X40.0044 Y3.9418 F900
    G01 X40.1002 Y3.9515 F900
    G01 X40.1950 Y3.9687 F900
    G01 X40.2881 Y3.9933 F900
    G01 X40.3790 Y4.0251 F900
    G01 X40.4671 Y4.0639 F900
    G01 X40.5520 Y4.1094 F900
    G01 X40.6330 Y4.1615 F900
    G01 X40.7097 Y4.2198 F900
    G01 X40.7816 Y4.2838 F900
    G01 X40.8486 Y4.3577 F900
    G01 X40.9112 Y4.4355 F900
    G01 X40.9692 Y4.5167 F900
    G01 X41.0223 Y4.6012 F900
    G01 X41.0704 Y4.6886 F900
    G01 X41.1132 Y4.7787 F900
    G01 X41.1508 Y4.8712 F900
    G01 X41.1828 Y4.9657 F900
    G01 X41.2093 Y5.0619 F900
    G01 X41.2301 Y5.1595 F900
    G01 X41.2452 Y5.2582 F900
    G01 X41.2545 Y5.3575 F900
    G01 X41.2580 Y5.4572 F900
    G01 X41.2556 Y5.5570 F900
    G01 Y5.6569 F900
    G01 X41.2509 Y5.7567 F900
    G01 X41.2415 Y5.8562 F900
    G01 X41.2274 Y5.9551 F900
    G01 X41.2088 Y6.0532 F900
    G01 X41.1855 Y6.1503 F900
    G01 X41.1577 Y6.2463 F900
    G01 X41.1254 Y6.3408 F900
    G01 X41.0886 Y6.4337 F900
    G01 X41.0532 Y6.5137 F900
    G01 X41.0112 Y6.5905 F900
    G01 X40.9629 Y6.6635 F900
    G01 X40.9086 Y6.7322 F900
    G01 X40.8488 Y6.7960 F900
    G01 X40.7838 Y6.8547 F900
    G01 X40.7142 Y6.9077 F900
    G01 X40.6403 Y6.9546 F900
    G01 X40.5453 Y6.9930 F900
    G01 X40.4477 Y7.0241 F900
    G01 X40.3481 Y7.0480 F900
    G01 X40.2470 Y7.0644 F900
    G01 X40.1449 Y7.0733 F900
    G01 X40.0425 Y7.0745 F900
    G01 X39.9402 Y7.0682 F900
    G01 X39.8387 Y7.0543 F900
    G01 X39.7385 Y7.0330 F900
    G01 X39.6402 Y7.0042 F900
    G01 X39.5443 Y6.9683 F900
    G01 X39.4513 Y6.9253 F900
    G01 X39.3617 Y6.8756 F900
    G01 X39.2761 Y6.8194 F900
    G01 X39.1948 Y6.7570 F900
    G01 X39.1185 Y6.6887 F900
    G01 X39.1129 Y7.0028 F900
    G01 X38.6116 F900
    G00 Z2.0000 F2100

    ;No. 13: Engraving 155
    G00 X39.1129 Y6.2590 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y4.5620 F900
    G01 X39.1976 Y4.5211 F900
    G01 X39.2846 Y4.4854 F900
    G01 X39.3736 Y4.4551 F900
    G01 X39.4642 Y4.4301 F900
    G01 X39.5562 Y4.4106 F900
    G01 X39.6492 Y4.3968 F900
    G01 X39.7428 Y4.3885 F900
    G01 X39.8368 Y4.3859 F900
    G01 X39.9098 Y4.3860 F900
    G01 X39.9826 Y4.3927 F900
    G01 X40.0544 Y4.4058 F900
    G01 X40.1248 Y4.4253 F900
    G01 X40.1932 Y4.4511 F900
    G01 X40.2589 Y4.4828 F900
    G01 X40.3216 Y4.5203 F900
    G01 X40.3807 Y4.5633 F900
    G01 X40.4357 Y4.6114 F900
    G01 X40.4861 Y4.6642 F900
    G01 X40.5317 Y4.7213 F900
    G01 X40.5719 Y4.7822 F900
    G01 X40.6065 Y4.8466 F900
    G01 X40.6405 Y4.9427 F900
    G01 X40.6695 Y5.0404 F900
    G01 X40.6934 Y5.1395 F900
    G01 X40.7123 Y5.2396 F900
    G01 X40.7260 Y5.3407 F900
    G01 X40.7345 Y5.4422 F900
    G01 X40.7378 Y5.5441 F900
    G01 X40.7359 Y5.6460 F900
    G01 X40.7288 Y5.7477 F900
    G01 X40.7165 Y5.8489 F900
    G01 X40.6990 Y5.9493 F900
    G01 X40.6764 Y6.0487 F900
    G01 X40.6488 Y6.1468 F900
    G01 X40.6298 Y6.1999 F900
    G01 X40.6063 Y6.2510 F900
    G01 X40.5785 Y6.3000 F900
    G01 X40.5466 Y6.3465 F900
    G01 X40.5109 Y6.3900 F900
    G01 X40.4715 Y6.4302 F900
    G01 X40.4288 Y6.4670 F900
    G01 X40.3831 Y6.4999 F900
    G01 X40.3347 Y6.5288 F900
    G01 X40.2841 Y6.5534 F900
    G01 X40.2315 Y6.5735 F900
    G01 X40.1774 Y6.5891 F900
    G01 X40.1221 Y6.6000 F900
    G01 X40.0661 Y6.6061 F900
    G01 X39.9624 Y6.6038 F900
    G01 X39.8592 Y6.5940 F900
    G01 X39.7570 Y6.5767 F900
    G01 X39.6563 Y6.5521 F900
    G01 X39.5576 Y6.5202 F900
    G01 X39.4615 Y6.4812 F900
    G01 X39.3685 Y6.4353 F900
    G01 X39.2791 Y6.3828 F900
    G01 X39.1938 Y6.3239 F900
    G01 X39.1129 Y6.2590 F900
    G00 Z2.0000 F2100

    ;No. 14: Engraving 157
    G00 X42.1543 Y7.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y4.0000 F900
    G01 X42.6556 F900
    G01 Y7.0028 F900
    G01 X42.1543 F900
    G00 Z2.0000 F2100

    ;No. 15: Engraving 156
    G00 X42.1212 Y8.0275 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y7.5096 F900
    G01 X42.6887 F900
    G01 Y8.0275 F900
    G01 X42.1212 F900
    G00 Z2.0000 F2100

    ;No. 16: Engraving 158
    G00 X43.4986 Y5.6364 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X43.4919 Y5.5366 F900
    G01 X43.4904 Y5.4366 F900
    G01 X43.4944 Y5.3367 F900
    G01 X43.5037 Y5.2372 F900
    G01 X43.5183 Y5.1383 F900
    G01 X43.5382 Y5.0403 F900
    G01 X43.5634 Y4.9435 F900
    G01 X43.5937 Y4.8482 F900
    G01 X43.6291 Y4.7547 F900
    G01 X43.6694 Y4.6632 F900
    G01 X43.7146 Y4.5740 F900
    G01 X43.7645 Y4.4874 F900
    G01 X43.8237 Y4.3967 F900
    G01 X43.8907 Y4.3203 F900
    G01 X43.9635 Y4.2493 F900
    G01 X44.0416 Y4.1842 F900
    G01 X44.1245 Y4.1254 F900
    G01 X44.2117 Y4.0732 F900
    G01 X44.3027 Y4.0279 F900
    G01 X44.3970 Y3.9899 F900
    G01 X44.4939 Y3.9593 F900
    G01 X44.5929 Y3.9364 F900
    G01 X44.6934 Y3.9212 F900
    G01 X44.7948 Y3.9139 F900
    G01 X44.8965 Y3.9145 F900
    G01 X44.9942 Y3.9150 F900
    G01 X45.0916 Y3.9230 F900
    G01 X45.1880 Y3.9384 F900
    G01 X45.2831 Y3.9612 F900
    G01 X45.3761 Y3.9911 F900
    G01 X45.4665 Y4.0281 F900
    G01 X45.5539 Y4.0718 F900
    G01 X45.6377 Y4.1221 F900
    G01 X45.7173 Y4.1787 F900
    G01 X45.7925 Y4.2412 F900
    G01 X45.8626 Y4.3092 F900
    G01 X45.9273 Y4.3824 F900
    G01 X45.9863 Y4.4603 F900
    G01 X46.0391 Y4.5425 F900
    G01 X46.0855 Y4.6285 F900
    G01 X46.1252 Y4.7178 F900
    G01 X46.1594 Y4.8095 F900
    G01 X46.1892 Y4.9028 F900
    G01 X46.2145 Y4.9973 F900
    G01 X46.2353 Y5.0930 F900
    G01 X46.2515 Y5.1895 F900
    G01 X46.2631 Y5.2867 F900
    G01 X46.2701 Y5.3843 F900
    G01 X46.2724 Y5.4822 F900
    G01 X46.2700 Y5.5801 F900
    G01 X46.2630 Y5.6777 F900
    G01 X46.2514 Y5.7749 F900
    G01 X46.2351 Y5.8714 F900
    G01 X46.2143 Y5.9671 F900
    G01 X46.1889 Y6.0616 F900
    G01 X46.1590 Y6.1548 F900
    G01 X46.1248 Y6.2465 F900
    G01 X46.0862 Y6.3365 F900
    G01 X46.0434 Y6.4245 F900
    G01 X45.9965 Y6.5104 F900
    G01 X45.9455 Y6.5940 F900
    G01 X45.8764 Y6.6702 F900
    G01 X45.8020 Y6.7411 F900
    G01 X45.7226 Y6.8065 F900
    G01 X45.6386 Y6.8658 F900
    G01 X45.5505 Y6.9188 F900
    G01 X45.4587 Y6.9652 F900
    G01 X45.3638 Y7.0048 F900
    G01 X45.2663 Y7.0374 F900
    G01 X45.1666 Y7.0627 F900
    G01 X45.0653 Y7.0807 F900
    G01 X44.9631 Y7.0912 F900
    G01 X44.8603 Y7.0941 F900
    G01 X44.7575 Y7.0896 F900
    G01 X44.6554 Y7.0776 F900
    G01 X44.5544 Y7.0581 F900
    G01 X44.4552 Y7.0313 F900
    G01 X44.3581 Y6.9972 F900
    G01 X44.2642 Y6.9573 F900
    G01 X44.1738 Y6.9097 F900
    G01 X44.0878 Y6.8548 F900
    G01 X44.0066 Y6.7929 F900
    G01 X43.9308 Y6.7244 F900
    G01 X43.8610 Y6.6499 F900
    G01 X43.7976 Y6.5699 F900
    G01 X43.7410 Y6.4848 F900
    G01 X43.6949 Y6.3973 F900
    G01 X43.6534 Y6.3076 F900
    G01 X43.6165 Y6.2157 F900
    G01 X43.5845 Y6.1222 F900
    G01 X43.5573 Y6.0270 F900
    G01 X43.5350 Y5.9306 F900
    G01 X43.5178 Y5.8332 F900
    G01 X43.5057 Y5.7350 F900
    G01 X43.4986 Y5.6364 F900
    G00 Z2.0000 F2100

    ;No. 17: Engraving 159
    G00 X44.0165 Y5.6694 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y5.3333 F900
    G01 X44.0441 Y5.1129 F900
    G01 X44.0992 Y4.9036 F900
    G01 X44.2111 Y4.6806 F900
    G01 X44.2534 Y4.6248 F900
    G01 X44.3005 Y4.5730 F900
    G01 X44.3520 Y4.5256 F900
    G01 X44.4076 Y4.4830 F900
    G01 X44.4668 Y4.4457 F900
    G01 X44.5292 Y4.4137 F900
    G01 X44.5941 Y4.3875 F900
    G01 X44.6611 Y4.3673 F900
    G01 X44.7297 Y4.3531 F900
    G01 X44.7993 Y4.3452 F900
    G01 X44.8693 Y4.3435 F900
    G01 X44.9377 Y4.3442 F900
    G01 X45.0058 Y4.3506 F900
    G01 X45.0730 Y4.3628 F900
    G01 X45.1391 Y4.3806 F900
    G01 X45.2033 Y4.4040 F900
    G01 X45.2654 Y4.4327 F900
    G01 X45.3248 Y4.4666 F900
    G01 X45.3811 Y4.5054 F900
    G01 X45.4339 Y4.5488 F900
    G01 X45.4829 Y4.5965 F900
    G01 X45.5276 Y4.6482 F900
    G01 X45.5678 Y4.7036 F900
    G01 X45.6032 Y4.7621 F900
    G01 X45.6334 Y4.8234 F900
    G01 X45.6584 Y4.8871 F900
    G01 X45.6882 Y4.9856 F900
    G01 X45.7127 Y5.0856 F900
    G01 X45.7317 Y5.1868 F900
    G01 X45.7452 Y5.2889 F900
    G01 X45.7531 Y5.3916 F900
    G01 X45.7554 Y5.4946 F900
    G01 X45.7522 Y5.5975 F900
    G01 X45.7433 Y5.7001 F900
    G01 X45.7289 Y5.8020 F900
    G01 X45.7090 Y5.9031 F900
    G01 X45.6837 Y6.0029 F900
    G01 X45.6530 Y6.1012 F900
    G01 X45.6170 Y6.1976 F900
    G01 X45.5758 Y6.2920 F900
    G01 X45.5294 Y6.3530 F900
    G01 X45.4778 Y6.4096 F900
    G01 X45.4213 Y6.4614 F900
    G01 X45.3605 Y6.5079 F900
    G01 X45.2957 Y6.5488 F900
    G01 X45.2275 Y6.5837 F900
    G01 X45.1564 Y6.6124 F900
    G01 X45.0831 Y6.6346 F900
    G01 X45.0081 Y6.6501 F900
    G01 X44.9320 Y6.6589 F900
    G01 X44.8554 Y6.6608 F900
    G01 X44.7789 Y6.6559 F900
    G01 X44.7032 Y6.6441 F900
    G01 X44.6289 Y6.6256 F900
    G01 X44.5565 Y6.6006 F900
    G01 X44.4907 Y6.5698 F900
    G01 X44.4279 Y6.5333 F900
    G01 X44.3687 Y6.4912 F900
    G01 X44.3135 Y6.4440 F900
    G01 X44.2627 Y6.3921 F900
    G01 X44.2169 Y6.3357 F900
    G01 X44.1763 Y6.2755 F900
    G01 X44.1320 Y6.1800 F900
    G01 X44.0946 Y6.0817 F900
    G01 X44.0642 Y5.9809 F900
    G01 X44.0410 Y5.8783 F900
    G01 X44.0251 Y5.7743 F900
    G01 X44.0165 Y5.6694 F900
    G00 Z2.0000 F2100

    ;No. 18: Engraving 160
    G00 X47.1515 Y7.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y4.0000 F900
    G01 X47.6529 F900
    G01 Y6.2424 F900
    G01 X47.7274 Y6.3015 F900
    G01 X47.8052 Y6.3560 F900
    G01 X47.8862 Y6.4058 F900
    G01 X47.9700 Y6.4507 F900
    G01 X48.0564 Y6.4905 F900
    G01 X48.1449 Y6.5250 F900
    G01 X48.2354 Y6.5542 F900
    G01 X48.3274 Y6.5780 F900
    G01 X48.4207 Y6.5962 F900
    G01 X48.5150 Y6.6089 F900
    G01 X48.5605 Y6.6149 F900
    G01 X48.6063 Y6.6169 F900
    G01 X48.6522 Y6.6149 F900
    G01 X48.6977 Y6.6089 F900
    G01 X48.7425 Y6.5989 F900
    G01 X48.7862 Y6.5851 F900
    G01 X48.8286 Y6.5675 F900
    G01 X48.8693 Y6.5463 F900
    G01 X48.9080 Y6.5216 F900
    G01 X48.9444 Y6.4937 F900
    G01 X48.9782 Y6.4626 F900
    G01 X49.0092 Y6.4287 F900
    G01 X49.0371 Y6.3923 F900
    G01 X49.0617 Y6.3535 F900
    G01 X49.0828 Y6.3128 F900
    G01 X49.1003 Y6.2704 F900
    G01 X49.1140 Y6.2266 F900
    G01 X49.1515 Y5.9780 F900
    G01 X49.1625 Y5.7576 F900
    G01 Y4.0000 F900
    G01 X49.6584 F900
    G01 X49.6554 Y6.1414 F900
    G01 X49.6437 Y6.2397 F900
    G01 X49.6242 Y6.3368 F900
    G01 X49.5971 Y6.4320 F900
    G01 X49.5624 Y6.5247 F900
    G01 X49.5205 Y6.6144 F900
    G01 X49.4716 Y6.7005 F900
    G01 X49.4160 Y6.7824 F900
    G01 X49.3527 Y6.8416 F900
    G01 X49.2846 Y6.8953 F900
    G01 X49.2122 Y6.9431 F900
    G01 X49.1361 Y6.9846 F900
    G01 X49.0567 Y7.0194 F900
    G01 X48.9747 Y7.0475 F900
    G01 X48.8905 Y7.0685 F900
    G01 X48.8049 Y7.0823 F900
    G01 X48.7185 Y7.0888 F900
    G01 X48.6318 Y7.0880 F900
    G01 X48.5455 Y7.0799 F900
    G01 X48.4477 Y7.0627 F900
    G01 X48.3512 Y7.0398 F900
    G01 X48.2561 Y7.0114 F900
    G01 X48.1628 Y6.9775 F900
    G01 X48.0717 Y6.9382 F900
    G01 X47.9830 Y6.8937 F900
    G01 X47.8970 Y6.8441 F900
    G01 X47.8141 Y6.7896 F900
    G01 X47.7345 Y6.7304 F900
    G01 X47.6584 Y6.6667 F900
    G01 X47.6529 Y7.0028 F900
    G01 X47.1515 F900
    G00 Z2.0000 F2100

    ;No. 19: Engraving 138
    G00 X45.2039 Y16.5124 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0220 F900
    G01 X45.5246 Y15.9702 F900
    G01 X45.8489 Y15.9499 F900
    G01 X45.9488 Y15.9419 F900
    G01 X46.0490 Y15.9426 F900
    G01 X46.1488 Y15.9520 F900
    G01 X46.2474 Y15.9701 F900
    G01 X46.3441 Y15.9966 F900
    G01 X46.4381 Y16.0314 F900
    G01 X46.5287 Y16.0743 F900
    G01 X46.6152 Y16.1248 F900
    G01 X46.6971 Y16.1827 F900
    G01 X46.7736 Y16.2474 F900
    G01 X46.8442 Y16.3186 F900
    G01 X46.9084 Y16.3956 F900
    G01 X46.9656 Y16.4779 F900
    G01 X47.0480 Y16.6808 F900
    G01 X47.0882 Y16.9256 F900
    G01 Y20.0000 F900
    G01 X45.7163 F900
    G01 Y19.5813 F900
    G01 X46.5647 Y19.5758 F900
    G01 Y17.1956 F900
    G01 X46.5427 Y16.8705 F900
    G01 X46.5388 Y16.8293 F900
    G01 X46.5313 Y16.7885 F900
    G01 X46.5203 Y16.7486 F900
    G01 X46.5059 Y16.7097 F900
    G01 X46.4881 Y16.6723 F900
    G01 X46.4671 Y16.6365 F900
    G01 X46.4431 Y16.6027 F900
    G01 X46.4163 Y16.5711 F900
    G01 X46.3868 Y16.5420 F900
    G01 X46.3549 Y16.5156 F900
    G01 X46.3208 Y16.4920 F900
    G01 X46.2848 Y16.4715 F900
    G01 X46.2472 Y16.4542 F900
    G01 X46.2081 Y16.4403 F900
    G01 X46.1680 Y16.4298 F900
    G01 X46.0712 Y16.4159 F900
    G01 X45.9738 Y16.4069 F900
    G01 X45.8761 Y16.4029 F900
    G01 X45.7783 Y16.4039 F900
    G01 X45.6807 Y16.4097 F900
    G01 X45.5835 Y16.4206 F900
    G01 X45.4870 Y16.4363 F900
    G01 X45.3913 Y16.4569 F900
    G01 X45.2969 Y16.4823 F900
    G01 X45.2039 Y16.5124 F900
    G00 Z2.0000 F2100

    ;No. 20: Engraving 137
    G00 X42.9945 Y17.5482 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X42.9941 Y17.4480 F900
    G01 X42.9963 Y17.3479 F900
    G01 X43.0011 Y17.2478 F900
    G01 X43.0085 Y17.1479 F900
    G01 X43.0185 Y17.0482 F900
    G01 X43.0311 Y16.9488 F900
    G01 X43.0463 Y16.8498 F900
    G01 X43.0640 Y16.7512 F900
    G01 X43.0844 Y16.6531 F900
    G01 X43.1072 Y16.5556 F900
    G01 X43.1327 Y16.4587 F900
    G01 X43.1606 Y16.3625 F900
    G01 X43.1910 Y16.2670 F900
    G01 X43.2239 Y16.1724 F900
    G01 X43.2593 Y16.0787 F900
    G01 X43.2971 Y15.9859 F900
    G01 X43.3373 Y15.8941 F900
    G01 X43.3799 Y15.8034 F900
    G01 X43.4248 Y15.7139 F900
    G01 X43.4720 Y15.6256 F900
    G01 X43.5216 Y15.5385 F900
    G01 X43.5734 Y15.4527 F900
    G01 X43.6274 Y15.3683 F900
    G01 X43.6835 Y15.2854 F900
    G01 X43.7419 Y15.2039 F900
    G01 X43.8023 Y15.1240 F900
    G01 X43.8648 Y15.0457 F900
    G01 X43.9293 Y14.9691 F900
    G01 X43.9972 Y14.8926 F900
    G01 X44.6088 F900
    G01 Y14.9201 F900
    G01 X44.5366 Y14.9891 F900
    G01 X44.4664 Y15.0601 F900
    G01 X44.3982 Y15.1331 F900
    G01 X44.3320 Y15.2079 F900
    G01 X44.2680 Y15.2845 F900
    G01 X44.2061 Y15.3628 F900
    G01 X44.1464 Y15.4429 F900
    G01 X44.0889 Y15.5246 F900
    G01 X44.0337 Y15.6078 F900
    G01 X43.9809 Y15.6926 F900
    G01 X43.9305 Y15.7787 F900
    G01 X43.8824 Y15.8663 F900
    G01 X43.8368 Y15.9552 F900
    G01 X43.7938 Y16.0452 F900
    G01 X43.7532 Y16.1365 F900
    G01 X43.7152 Y16.2288 F900
    G01 X43.6797 Y16.3222 F900
    G01 X43.6469 Y16.4165 F900
    G01 X43.6167 Y16.5117 F900
    G01 X43.5892 Y16.6077 F900
    G01 X43.5643 Y16.7044 F900
    G01 X43.5422 Y16.8018 F900
    G01 X43.5227 Y16.8998 F900
    G01 X43.5060 Y16.9982 F900
    G01 X43.4921 Y17.0971 F900
    G01 X43.4808 Y17.1963 F900
    G01 X43.4724 Y17.2958 F900
    G01 X43.4667 Y17.3955 F900
    G01 X43.4638 Y17.4954 F900
    G01 X43.4637 Y17.5952 F900
    G01 X43.4663 Y17.6951 F900
    G01 X43.4718 Y17.7948 F900
    G01 X43.4904 Y17.9890 F900
    G01 X43.5061 Y18.0864 F900
    G01 X43.5242 Y18.1834 F900
    G01 X43.5447 Y18.2799 F900
    G01 X43.5675 Y18.3759 F900
    G01 X43.5926 Y18.4714 F900
    G01 X43.6200 Y18.5662 F900
    G01 X43.6497 Y18.6603 F900
    G01 X43.6817 Y18.7536 F900
    G01 X43.7159 Y18.8462 F900
    G01 X43.7524 Y18.9379 F900
    G01 X43.7911 Y19.0286 F900
    G01 X43.8320 Y19.1185 F900
    G01 X43.9477 Y19.3333 F900
    G01 X44.1350 Y19.6253 F900
    G01 X44.3664 Y19.9118 F900
    G01 X44.6088 Y20.1543 F900
    G01 Y20.1818 F900
    G01 X43.9972 F900
    G01 X43.7548 Y19.8788 F900
    G01 X43.5441 Y19.5621 F900
    G01 X43.4933 Y19.4760 F900
    G01 X43.4448 Y19.3887 F900
    G01 X43.3986 Y19.3000 F900
    G01 X43.3547 Y19.2102 F900
    G01 X43.3133 Y19.1193 F900
    G01 X43.2743 Y19.0273 F900
    G01 X43.2377 Y18.9343 F900
    G01 X43.2036 Y18.8403 F900
    G01 X43.1720 Y18.7455 F900
    G01 X43.1430 Y18.6499 F900
    G01 X43.1164 Y18.5535 F900
    G01 X43.0925 Y18.4565 F900
    G01 X43.0711 Y18.3589 F900
    G01 X43.0523 Y18.2607 F900
    G01 X43.0361 Y18.1621 F900
    G01 X43.0226 Y18.0631 F900
    G01 X43.0116 Y17.9637 F900
    G01 X43.0033 Y17.8641 F900
    G01 X42.9977 Y17.7644 F900
    G01 X42.9947 Y17.6645 F900
    G01 X42.9945 Y17.5482 F900
    G00 Z2.0000 F2100

    ;No. 21: Engraving 136
    G00 X39.1047 Y19.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y18.5785 F900
    G01 X39.4463 Y18.5730 F900
    G01 Y16.9146 F900
    G01 X39.4804 Y16.6326 F900
    G01 X39.5399 Y16.4132 F900
    G01 X39.5739 Y16.3501 F900
    G01 X39.6131 Y16.2900 F900
    G01 X39.6573 Y16.2335 F900
    G01 X39.7061 Y16.1809 F900
    G01 X39.7591 Y16.1326 F900
    G01 X39.8161 Y16.0891 F900
    G01 X39.8766 Y16.0505 F900
    G01 X39.9401 Y16.0171 F900
    G01 X40.0062 Y15.9893 F900
    G01 X40.0744 Y15.9672 F900
    G01 X40.1443 Y15.9509 F900
    G01 X40.2153 Y15.9406 F900
    G01 X40.2869 Y15.9364 F900
    G01 X40.3586 Y15.9383 F900
    G01 X40.7080 Y15.9669 F900
    G01 X40.9945 Y16.0275 F900
    G01 Y16.4793 F900
    G01 X40.9029 Y16.4444 F900
    G01 X40.8089 Y16.4167 F900
    G01 X40.7129 Y16.3964 F900
    G01 X40.6157 Y16.3836 F900
    G01 X40.5178 Y16.3785 F900
    G01 X40.4198 Y16.3810 F900
    G01 X40.3223 Y16.3912 F900
    G01 X40.2872 Y16.3984 F900
    G01 X40.2528 Y16.4087 F900
    G01 X40.2195 Y16.4219 F900
    G01 X40.1874 Y16.4379 F900
    G01 X40.1568 Y16.4567 F900
    G01 X40.1280 Y16.4781 F900
    G01 X40.1011 Y16.5018 F900
    G01 X40.0764 Y16.5278 F900
    G01 X40.0541 Y16.5559 F900
    G01 X40.0343 Y16.5858 F900
    G01 X40.0171 Y16.6173 F900
    G01 X39.9642 Y16.7824 F900
    G01 X39.9477 Y17.0248 F900
    G01 Y18.5730 F900
    G01 X40.9945 Y18.5785 F900
    G01 Y19.0028 F900
    G01 X39.9532 F900
    G01 X39.9477 Y19.8623 F900
    G01 X39.4463 F900
    G01 Y19.0083 F900
    G01 X39.1047 Y19.0028 F900
    G00 Z2.0000 F2100

    ;No. 22: Engraving 135
    G00 X37.0110 Y19.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0000 F900
    G01 X37.5124 F900
    G01 Y18.1322 F900
    G01 X37.5859 Y18.1979 F900
    G01 X37.6638 Y18.2582 F900
    G01 X37.7459 Y18.3127 F900
    G01 X37.8317 Y18.3613 F900
    G01 X37.9207 Y18.4035 F900
    G01 X38.0125 Y18.4393 F900
    G01 X38.1066 Y18.4685 F900
    G01 X38.2026 Y18.4909 F900
    G01 X38.3000 Y18.5063 F900
    G01 X38.3981 Y18.5147 F900
    G01 X38.4967 Y18.5162 F900
    G01 X38.5951 Y18.5105 F900
    G01 X38.6928 Y18.4979 F900
    G01 X38.7894 Y18.4782 F900
    G01 X38.8843 Y18.4518 F900
    G01 Y18.9697 F900
    G01 X38.7866 Y18.9861 F900
    G01 X38.6879 Y18.9960 F900
    G01 X38.5889 Y18.9994 F900
    G01 X38.4898 Y18.9963 F900
    G01 X38.3912 Y18.9867 F900
    G01 X38.2934 Y18.9707 F900
    G01 X38.1969 Y18.9483 F900
    G01 X38.1020 Y18.9196 F900
    G01 X38.0092 Y18.8848 F900
    G01 X37.9189 Y18.8439 F900
    G01 X37.8315 Y18.7972 F900
    G01 X37.7473 Y18.7449 F900
    G01 X37.6668 Y18.6872 F900
    G01 X37.5902 Y18.6243 F900
    G01 X37.5179 Y18.5565 F900
    G01 X37.5124 Y19.0028 F900
    G01 X37.0110 F900
    G00 Z2.0000 F2100

    ;No. 23: Engraving 134
    G00 X33.9256 Y17.8512 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X33.9311 Y17.8347 F900
    G01 X35.6501 F900
    G01 X35.6567 Y17.8976 F900
    G01 X35.6578 Y17.9609 F900
    G01 X35.6535 Y18.0240 F900
    G01 X35.6438 Y18.0865 F900
    G01 X35.6287 Y18.1479 F900
    G01 X35.6084 Y18.2078 F900
    G01 X35.5831 Y18.2657 F900
    G01 X35.5528 Y18.3213 F900
    G01 X35.5179 Y18.3740 F900
    G01 X35.4786 Y18.4236 F900
    G01 X35.4352 Y18.4696 F900
    G01 X35.3880 Y18.5117 F900
    G01 X35.3374 Y18.5496 F900
    G01 X35.2836 Y18.5830 F900
    G01 X35.2273 Y18.6116 F900
    G01 X35.1686 Y18.6353 F900
    G01 X35.1082 Y18.6539 F900
    G01 X35.0463 Y18.6672 F900
    G01 X34.9836 Y18.6752 F900
    G01 X34.9204 Y18.6777 F900
    G01 X34.8572 Y18.6748 F900
    G01 X34.7807 Y18.6755 F900
    G01 X34.7044 Y18.6696 F900
    G01 X34.6289 Y18.6572 F900
    G01 X34.5548 Y18.6383 F900
    G01 X34.4825 Y18.6131 F900
    G01 X34.4127 Y18.5817 F900
    G01 X34.3459 Y18.5445 F900
    G01 X34.2825 Y18.5016 F900
    G01 X34.2231 Y18.4535 F900
    G01 X34.1680 Y18.4004 F900
    G01 X34.1177 Y18.3427 F900
    G01 X34.0725 Y18.2809 F900
    G01 X34.0329 Y18.2155 F900
    G01 X33.9990 Y18.1469 F900
    G01 X33.9711 Y18.0756 F900
    G01 X33.9495 Y18.0022 F900
    G01 X33.9343 Y17.9273 F900
    G01 X33.9256 Y17.8512 F900
    G00 Z2.0000 F2100

    ;No. 24: Engraving 133
    G00 X33.4187 Y17.6143 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X33.4112 Y17.5143 F900
    G01 X33.4097 Y17.4140 F900
    G01 X33.4143 Y17.3138 F900
    G01 X33.4249 Y17.2140 F900
    G01 X33.4414 Y17.1151 F900
    G01 X33.4639 Y17.0173 F900
    G01 X33.4923 Y16.9211 F900
    G01 X33.5264 Y16.8267 F900
    G01 X33.5660 Y16.7346 F900
    G01 X33.6112 Y16.6450 F900
    G01 X33.6617 Y16.5583 F900
    G01 X33.7173 Y16.4748 F900
    G01 X33.7989 Y16.3691 F900
    G01 X33.8728 Y16.3039 F900
    G01 X33.9504 Y16.2433 F900
    G01 X34.0316 Y16.1874 F900
    G01 X34.1160 Y16.1366 F900
    G01 X34.2033 Y16.0909 F900
    G01 X34.2932 Y16.0507 F900
    G01 X34.3854 Y16.0159 F900
    G01 X34.4795 Y15.9867 F900
    G01 X34.5753 Y15.9633 F900
    G01 X34.6722 Y15.9457 F900
    G01 X34.7700 Y15.9340 F900
    G01 X34.8684 Y15.9282 F900
    G01 X34.9669 Y15.9284 F900
    G01 X35.0714 Y15.9318 F900
    G01 X35.1757 Y15.9391 F900
    G01 X35.2796 Y15.9505 F900
    G01 X35.3830 Y15.9659 F900
    G01 X35.4857 Y15.9852 F900
    G01 X35.5877 Y16.0084 F900
    G01 X35.6886 Y16.0355 F900
    G01 X35.7885 Y16.0664 F900
    G01 X35.8871 Y16.1011 F900
    G01 X35.9842 Y16.1396 F900
    G01 X36.0799 Y16.1818 F900
    G01 Y16.7273 F900
    G01 X36.0523 F900
    G01 X35.9256 Y16.6336 F900
    G01 X35.7548 Y16.5455 F900
    G01 X35.5510 Y16.4628 F900
    G01 X35.3140 Y16.3967 F900
    G01 X35.2105 Y16.3804 F900
    G01 X35.1061 Y16.3709 F900
    G01 X35.0013 Y16.3681 F900
    G01 X34.8965 Y16.3720 F900
    G01 X34.7922 Y16.3828 F900
    G01 X34.6888 Y16.4002 F900
    G01 X34.5868 Y16.4242 F900
    G01 X34.5075 Y16.4551 F900
    G01 X34.4311 Y16.4926 F900
    G01 X34.3584 Y16.5367 F900
    G01 X34.2897 Y16.5869 F900
    G01 X34.2256 Y16.6429 F900
    G01 X34.1666 Y16.7042 F900
    G01 X34.1131 Y16.7704 F900
    G01 X34.0656 Y16.8409 F900
    G01 X34.0244 Y16.9154 F900
    G01 X33.9898 Y16.9931 F900
    G01 X33.9620 Y17.0735 F900
    G01 X33.9414 Y17.1560 F900
    G01 X33.9279 Y17.2401 F900
    G01 X33.9218 Y17.3249 F900
    G01 X33.9256 Y17.4435 F900
    G01 X36.1405 Y17.4490 F900
    G01 X36.1351 Y17.8449 F900
    G01 X36.0799 Y18.2369 F900
    G01 X36.0527 Y18.3252 F900
    G01 X36.0188 Y18.4112 F900
    G01 X35.9784 Y18.4943 F900
    G01 X35.9318 Y18.5741 F900
    G01 X35.8792 Y18.6500 F900
    G01 X35.8209 Y18.7218 F900
    G01 X35.7537 Y18.7876 F900
    G01 X35.6811 Y18.8476 F900
    G01 X35.6037 Y18.9013 F900
    G01 X35.5221 Y18.9483 F900
    G01 X35.4369 Y18.9882 F900
    G01 X35.3486 Y19.0209 F900
    G01 X35.2578 Y19.0460 F900
    G01 X35.1653 Y19.0634 F900
    G01 X35.0614 Y19.0766 F900
    G01 X34.9569 Y19.0835 F900
    G01 X34.8521 Y19.0842 F900
    G01 X34.7475 Y19.0787 F900
    G01 X34.6435 Y19.0669 F900
    G01 X34.5403 Y19.0490 F900
    G01 X34.4383 Y19.0249 F900
    G01 X34.3380 Y18.9947 F900
    G01 X34.2397 Y18.9587 F900
    G01 X34.1519 Y18.9108 F900
    G01 X34.0675 Y18.8572 F900
    G01 X33.9869 Y18.7980 F900
    G01 X33.9105 Y18.7336 F900
    G01 X33.8385 Y18.6641 F900
    G01 X33.7714 Y18.5901 F900
    G01 X33.7094 Y18.5116 F900
    G01 X33.6528 Y18.4292 F900
    G01 X33.6018 Y18.3432 F900
    G01 X33.5568 Y18.2539 F900
    G01 X33.5178 Y18.1619 F900
    G01 X33.4851 Y18.0674 F900
    G01 X33.4588 Y17.9709 F900
    G01 X33.4390 Y17.8729 F900
    G01 X33.4259 Y17.7738 F900
    G01 X33.4187 Y17.6143 F900
    G00 Z2.0000 F2100

    ;No. 25: Engraving 132
    G00 X30.5978 Y18.2590 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.5620 F900
    G01 X30.6825 Y16.5211 F900
    G01 X30.7694 Y16.4854 F900
    G01 X30.8584 Y16.4551 F900
    G01 X30.9491 Y16.4301 F900
    G01 X31.0410 Y16.4106 F900
    G01 X31.1340 Y16.3968 F900
    G01 X31.2277 Y16.3885 F900
    G01 X31.3216 Y16.3859 F900
    G01 X31.3947 Y16.3860 F900
    G01 X31.4674 Y16.3927 F900
    G01 X31.5393 Y16.4058 F900
    G01 X31.6097 Y16.4253 F900
    G01 X31.6780 Y16.4511 F900
    G01 X31.7438 Y16.4828 F900
    G01 X31.8065 Y16.5203 F900
    G01 X31.8655 Y16.5633 F900
    G01 X31.9205 Y16.6114 F900
    G01 X31.9710 Y16.6642 F900
    G01 X32.0165 Y16.7213 F900
    G01 X32.0568 Y16.7822 F900
    G01 X32.0914 Y16.8466 F900
    G01 X32.1253 Y16.9427 F900
    G01 X32.1543 Y17.0404 F900
    G01 X32.1783 Y17.1395 F900
    G01 X32.1971 Y17.2396 F900
    G01 X32.2108 Y17.3407 F900
    G01 X32.2193 Y17.4422 F900
    G01 X32.2227 Y17.5441 F900
    G01 X32.2207 Y17.6460 F900
    G01 X32.2136 Y17.7477 F900
    G01 X32.2013 Y17.8489 F900
    G01 X32.1839 Y17.9493 F900
    G01 X32.1613 Y18.0487 F900
    G01 X32.1336 Y18.1468 F900
    G01 X32.1146 Y18.1999 F900
    G01 X32.0912 Y18.2510 F900
    G01 X32.0634 Y18.3000 F900
    G01 X32.0315 Y18.3465 F900
    G01 X31.9957 Y18.3900 F900
    G01 X31.9563 Y18.4302 F900
    G01 X31.9136 Y18.4670 F900
    G01 X31.8679 Y18.4999 F900
    G01 X31.8196 Y18.5288 F900
    G01 X31.7689 Y18.5534 F900
    G01 X31.7163 Y18.5735 F900
    G01 X31.6622 Y18.5891 F900
    G01 X31.6070 Y18.6000 F900
    G01 X31.5510 Y18.6061 F900
    G01 X31.4473 Y18.6038 F900
    G01 X31.3441 Y18.5940 F900
    G01 X31.2418 Y18.5767 F900
    G01 X31.1411 Y18.5521 F900
    G01 X31.0425 Y18.5202 F900
    G01 X30.9464 Y18.4812 F900
    G01 X30.8534 Y18.4353 F900
    G01 X30.7640 Y18.3828 F900
    G01 X30.6786 Y18.3239 F900
    G01 X30.5978 Y18.2590 F900
    G00 Z2.0000 F2100

    ;No. 26: Engraving 131
    G00 X30.0964 Y19.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y14.8926 F900
    G01 X30.5978 F900
    G01 Y16.1433 F900
    G01 X30.6895 Y16.0967 F900
    G01 X30.7840 Y16.0560 F900
    G01 X30.8807 Y16.0211 F900
    G01 X30.9795 Y15.9923 F900
    G01 X31.0798 Y15.9696 F900
    G01 X31.1813 Y15.9532 F900
    G01 X31.2836 Y15.9430 F900
    G01 X31.3864 Y15.9392 F900
    G01 X31.4892 Y15.9418 F900
    G01 X31.5851 Y15.9515 F900
    G01 X31.6798 Y15.9687 F900
    G01 X31.7729 Y15.9933 F900
    G01 X31.8638 Y16.0251 F900
    G01 X31.9520 Y16.0639 F900
    G01 X32.0368 Y16.1094 F900
    G01 X32.1178 Y16.1615 F900
    G01 X32.1945 Y16.2198 F900
    G01 X32.2664 Y16.2838 F900
    G01 X32.3335 Y16.3577 F900
    G01 X32.3961 Y16.4355 F900
    G01 X32.4540 Y16.5167 F900
    G01 X32.5071 Y16.6012 F900
    G01 X32.5552 Y16.6886 F900
    G01 X32.5981 Y16.7787 F900
    G01 X32.6356 Y16.8712 F900
    G01 X32.6677 Y16.9657 F900
    G01 X32.6942 Y17.0619 F900
    G01 X32.7150 Y17.1595 F900
    G01 X32.7301 Y17.2582 F900
    G01 X32.7393 Y17.3575 F900
    G01 X32.7428 Y17.4572 F900
    G01 X32.7404 Y17.5570 F900
    G01 Y17.6569 F900
    G01 X32.7357 Y17.7567 F900
    G01 X32.7263 Y17.8562 F900
    G01 X32.7123 Y17.9551 F900
    G01 X32.6936 Y18.0532 F900
    G01 X32.6703 Y18.1503 F900
    G01 X32.6425 Y18.2463 F900
    G01 X32.6102 Y18.3408 F900
    G01 X32.5735 Y18.4337 F900
    G01 X32.5380 Y18.5137 F900
    G01 X32.4960 Y18.5905 F900
    G01 X32.4477 Y18.6635 F900
    G01 X32.3935 Y18.7322 F900
    G01 X32.3336 Y18.7960 F900
    G01 X32.2687 Y18.8547 F900
    G01 X32.1990 Y18.9077 F900
    G01 X32.1252 Y18.9546 F900
    G01 X32.0302 Y18.9930 F900
    G01 X31.9326 Y19.0241 F900
    G01 X31.8330 Y19.0480 F900
    G01 X31.7318 Y19.0644 F900
    G01 X31.6298 Y19.0733 F900
    G01 X31.5273 Y19.0745 F900
    G01 X31.4251 Y19.0682 F900
    G01 X31.3236 Y19.0543 F900
    G01 X31.2234 Y19.0330 F900
    G01 X31.1251 Y19.0042 F900
    G01 X31.0291 Y18.9683 F900
    G01 X30.9361 Y18.9253 F900
    G01 X30.8466 Y18.8756 F900
    G01 X30.7609 Y18.8194 F900
    G01 X30.6797 Y18.7570 F900
    G01 X30.6033 Y18.6887 F900
    G01 X30.5978 Y19.0028 F900
    G01 X30.0964 F900
    G00 Z2.0000 F2100

    ;No. 27: Engraving 130
    G00 X26.4050 Y16.0055 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X26.9890 Y16.0000 F900
    G01 X27.8485 Y17.1515 F900
    G01 X28.7025 Y16.0000 F900
    G01 X29.3306 F900
    G01 X28.1570 Y17.5152 F900
    G01 Y17.5317 F900
    G01 X29.3306 Y19.0028 F900
    G01 X28.7466 F900
    G01 X27.8981 Y17.8678 F900
    G01 X27.0441 Y19.0028 F900
    G01 X26.4160 F900
    G01 X27.5730 Y17.4931 F900
    G01 X26.4050 Y16.0055 F900
    G00 Z2.0000 F2100

    ;No. 28: Engraving 129
    G00 X23.1928 Y20.0000 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0000 F900
    G01 X25.8264 F900
    G01 Y16.4683 F900
    G01 X23.7218 F900
    G01 X23.7163 Y17.4380 F900
    G01 X23.7218 Y17.9614 F900
    G01 X25.8264 F900
    G01 Y18.4298 F900
    G01 X23.7218 F900
    G01 X23.7163 Y19.5262 F900
    G01 X25.8264 Y19.5317 F900
    G01 Y20.0000 F900
    G01 X23.1928 F900
    G00 Z2.0000 F2100

    ;No. 29: Engraving 128
    G00 X20.6033 Y20.1818 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X20.7190 Y18.6281 F900
    G01 X21.0826 F900
    G01 X21.1928 Y20.1818 F900
    G01 X20.6033 F900
    G00 Z2.0000 F2100

    ;No. 30: Engraving 127
    G00 X17.5014 Y16.7438 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.1763 F900
    G01 X17.5925 Y16.1361 F900
    G01 X17.6849 Y16.0990 F900
    G01 X17.7786 Y16.0653 F900
    G01 X17.8734 Y16.0348 F900
    G01 X17.9693 Y16.0077 F900
    G01 X18.0660 Y15.9840 F900
    G01 X18.1635 Y15.9637 F900
    G01 X18.2616 Y15.9469 F900
    G01 X18.3603 Y15.9334 F900
    G01 X18.4639 Y15.9259 F900
    G01 X18.5677 Y15.9236 F900
    G01 X18.6715 Y15.9266 F900
    G01 X18.7750 Y15.9349 F900
    G01 X18.8780 Y15.9484 F900
    G01 X18.9801 Y15.9672 F900
    G01 X19.0812 Y15.9911 F900
    G01 X19.1809 Y16.0202 F900
    G01 X19.2790 Y16.0543 F900
    G01 X19.3561 Y16.0916 F900
    G01 X19.4297 Y16.1354 F900
    G01 X19.4994 Y16.1853 F900
    G01 X19.5646 Y16.2410 F900
    G01 X19.6248 Y16.3020 F900
    G01 X19.6795 Y16.3679 F900
    G01 X19.7285 Y16.4382 F900
    G01 X19.7713 Y16.5124 F900
    G01 X19.7985 Y16.5769 F900
    G01 X19.8199 Y16.6434 F900
    G01 X19.8356 Y16.7116 F900
    G01 X19.8453 Y16.7809 F900
    G01 X19.8490 Y16.8507 F900
    G01 X19.8467 Y16.9206 F900
    G01 X19.8384 Y16.9901 F900
    G01 X19.8242 Y17.0586 F900
    G01 X19.8041 Y17.1256 F900
    G01 X19.7783 Y17.1906 F900
    G01 X19.7470 Y17.2531 F900
    G01 X19.7104 Y17.3128 F900
    G01 X19.6688 Y17.3690 F900
    G01 X19.6226 Y17.4215 F900
    G01 X19.4430 Y17.5432 F900
    G01 X19.2446 Y17.6311 F900
    G01 X18.5427 Y17.7796 F900
    G01 X18.2658 Y17.8645 F900
    G01 X18.1426 Y17.9446 F900
    G01 X18.0523 Y18.0606 F900
    G01 X18.0406 Y18.0943 F900
    G01 X18.0318 Y18.1288 F900
    G01 X18.0261 Y18.1640 F900
    G01 X18.0235 Y18.1995 F900
    G01 X18.0239 Y18.2352 F900
    G01 X18.0274 Y18.2706 F900
    G01 X18.0340 Y18.3056 F900
    G01 X18.0436 Y18.3400 F900
    G01 X18.0561 Y18.3733 F900
    G01 X18.0715 Y18.4055 F900
    G01 X18.0964 Y18.4463 F900
    G01 X18.1457 Y18.4881 F900
    G01 X18.1984 Y18.5256 F900
    G01 X18.2541 Y18.5584 F900
    G01 X18.3124 Y18.5863 F900
    G01 X18.3729 Y18.6092 F900
    G01 X18.4351 Y18.6269 F900
    G01 X18.4986 Y18.6391 F900
    G01 X18.8408 Y18.6417 F900
    G01 X19.1212 Y18.5895 F900
    G01 X19.3912 Y18.4904 F900
    G01 X19.5840 Y18.3912 F900
    G01 X19.6942 Y18.3140 F900
    G01 X19.7218 F900
    G01 X19.7163 Y18.8540 F900
    G01 X19.6206 Y18.8948 F900
    G01 X19.5233 Y18.9316 F900
    G01 X19.4246 Y18.9643 F900
    G01 X19.3246 Y18.9928 F900
    G01 X19.2235 Y19.0172 F900
    G01 X19.1215 Y19.0373 F900
    G01 X19.0187 Y19.0531 F900
    G01 X18.9153 Y19.0646 F900
    G01 X18.8116 Y19.0718 F900
    G01 X18.7076 Y19.0746 F900
    G01 X18.6035 Y19.0752 F900
    G01 X18.4996 Y19.0677 F900
    G01 X18.3966 Y19.0522 F900
    G01 X18.2951 Y19.0288 F900
    G01 X18.1957 Y18.9977 F900
    G01 X18.0990 Y18.9591 F900
    G01 X18.0056 Y18.9131 F900
    G01 X17.9160 Y18.8600 F900
    G01 X17.8307 Y18.8002 F900
    G01 X17.7503 Y18.7340 F900
    G01 X17.7011 Y18.6786 F900
    G01 X17.6570 Y18.6191 F900
    G01 X17.6182 Y18.5560 F900
    G01 X17.5851 Y18.4898 F900
    G01 X17.5579 Y18.4208 F900
    G01 X17.5369 Y18.3498 F900
    G01 X17.5221 Y18.2772 F900
    G01 X17.5138 Y18.2036 F900
    G01 X17.5119 Y18.1296 F900
    G01 X17.5165 Y18.0556 F900
    G01 X17.5399 Y17.9284 F900
    G01 X17.5607 Y17.8665 F900
    G01 X17.5868 Y17.8067 F900
    G01 X17.6181 Y17.7494 F900
    G01 X17.6543 Y17.6951 F900
    G01 X17.6952 Y17.6443 F900
    G01 X17.7403 Y17.5972 F900
    G01 X17.7894 Y17.5542 F900
    G01 X17.8422 Y17.5158 F900
    G01 X17.8981 Y17.4821 F900
    G01 X18.0523 Y17.4105 F900
    G01 X18.2231 Y17.3554 F900
    G01 X18.9669 Y17.1956 F900
    G01 X19.0937 Y17.1515 F900
    G01 X19.2039 Y17.0909 F900
    G01 X19.2284 Y17.0681 F900
    G01 X19.2509 Y17.0433 F900
    G01 X19.2712 Y17.0166 F900
    G01 X19.2890 Y16.9882 F900
    G01 X19.3044 Y16.9584 F900
    G01 X19.3170 Y16.9274 F900
    G01 X19.3270 Y16.8954 F900
    G01 X19.3341 Y16.8626 F900
    G01 X19.3383 Y16.8293 F900
    G01 X19.3396 Y16.7959 F900
    G01 X19.3380 Y16.7624 F900
    G01 X19.3335 Y16.7292 F900
    G01 X19.3261 Y16.6965 F900
    G01 X19.3160 Y16.6645 F900
    G01 X19.3030 Y16.6336 F900
    G01 X19.2839 Y16.6005 F900
    G01 X19.2622 Y16.5692 F900
    G01 X19.2379 Y16.5397 F900
    G01 X19.2112 Y16.5123 F900
    G01 X19.1824 Y16.4873 F900
    G01 X19.1516 Y16.4647 F900
    G01 X19.1191 Y16.4447 F900
    G01 X19.0850 Y16.4275 F900
    G01 X19.0496 Y16.4132 F900
    G01 X18.7796 Y16.3581 F900
    G01 X18.5041 Y16.3526 F900
    G01 X18.4072 Y16.3705 F900
    G01 X18.3110 Y16.3920 F900
    G01 X18.2158 Y16.4172 F900
    G01 X18.1215 Y16.4460 F900
    G01 X18.0284 Y16.4783 F900
    G01 X17.9366 Y16.5141 F900
    G01 X17.8462 Y16.5534 F900
    G01 X17.7573 Y16.5961 F900
    G01 X17.6702 Y16.6421 F900
    G01 X17.5848 Y16.6913 F900
    G01 X17.5014 Y16.7438 F900
    G00 Z2.0000 F2100

    ;No. 31: Engraving 126
    G00 X14.6198 Y17.8512 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X14.6253 Y17.8347 F900
    G01 X16.3444 F900
    G01 X16.3509 Y17.8976 F900
    G01 X16.3520 Y17.9609 F900
    G01 X16.3477 Y18.0240 F900
    G01 X16.3380 Y18.0865 F900
    G01 X16.3229 Y18.1479 F900
    G01 X16.3026 Y18.2078 F900
    G01 X16.2773 Y18.2657 F900
    G01 X16.2470 Y18.3213 F900
    G01 X16.2121 Y18.3740 F900
    G01 X16.1728 Y18.4236 F900
    G01 X16.1294 Y18.4696 F900
    G01 X16.0822 Y18.5117 F900
    G01 X16.0316 Y18.5496 F900
    G01 X15.9779 Y18.5830 F900
    G01 X15.9215 Y18.6116 F900
    G01 X15.8628 Y18.6353 F900
    G01 X15.8024 Y18.6539 F900
    G01 X15.7405 Y18.6672 F900
    G01 X15.6778 Y18.6752 F900
    G01 X15.6146 Y18.6777 F900
    G01 X15.5514 Y18.6748 F900
    G01 X15.4749 Y18.6755 F900
    G01 X15.3986 Y18.6696 F900
    G01 X15.3231 Y18.6572 F900
    G01 X15.2490 Y18.6383 F900
    G01 X15.1768 Y18.6131 F900
    G01 X15.1070 Y18.5817 F900
    G01 X15.0401 Y18.5445 F900
    G01 X14.9767 Y18.5016 F900
    G01 X14.9173 Y18.4535 F900
    G01 X14.8622 Y18.4004 F900
    G01 X14.8119 Y18.3427 F900
    G01 X14.7667 Y18.2809 F900
    G01 X14.7271 Y18.2155 F900
    G01 X14.6932 Y18.1469 F900
    G01 X14.6653 Y18.0756 F900
    G01 X14.6437 Y18.0022 F900
    G01 X14.6285 Y17.9273 F900
    G01 X14.6198 Y17.8512 F900
    G00 Z2.0000 F2100

    ;No. 32: Engraving 125
    G00 X14.1129 Y17.6143 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X14.1054 Y17.5143 F900
    G01 X14.1040 Y17.4140 F900
    G01 X14.1085 Y17.3138 F900
    G01 X14.1191 Y17.2140 F900
    G01 X14.1357 Y17.1151 F900
    G01 X14.1582 Y17.0173 F900
    G01 X14.1865 Y16.9211 F900
    G01 X14.2206 Y16.8267 F900
    G01 X14.2603 Y16.7346 F900
    G01 X14.3054 Y16.6450 F900
    G01 X14.3559 Y16.5583 F900
    G01 X14.4115 Y16.4748 F900
    G01 X14.4931 Y16.3691 F900
    G01 X14.5670 Y16.3039 F900
    G01 X14.6446 Y16.2433 F900
    G01 X14.7258 Y16.1874 F900
    G01 X14.8102 Y16.1366 F900
    G01 X14.8975 Y16.0909 F900
    G01 X14.9875 Y16.0507 F900
    G01 X15.0796 Y16.0159 F900
    G01 X15.1738 Y15.9867 F900
    G01 X15.2695 Y15.9633 F900
    G01 X15.3664 Y15.9457 F900
    G01 X15.4643 Y15.9340 F900
    G01 X15.5626 Y15.9282 F900
    G01 X15.6612 Y15.9284 F900
    G01 X15.7656 Y15.9318 F900
    G01 X15.8699 Y15.9391 F900
    G01 X15.9738 Y15.9505 F900
    G01 X16.0772 Y15.9659 F900
    G01 X16.1800 Y15.9852 F900
    G01 X16.2819 Y16.0084 F900
    G01 X16.3828 Y16.0355 F900
    G01 X16.4827 Y16.0664 F900
    G01 X16.5813 Y16.1011 F900
    G01 X16.6785 Y16.1396 F900
    G01 X16.7741 Y16.1818 F900
    G01 Y16.7273 F900
    G01 X16.7466 F900
    G01 X16.6198 Y16.6336 F900
    G01 X16.4490 Y16.5455 F900
    G01 X16.2452 Y16.4628 F900
    G01 X16.0083 Y16.3967 F900
    G01 X15.9047 Y16.3804 F900
    G01 X15.8003 Y16.3709 F900
    G01 X15.6955 Y16.3681 F900
    G01 X15.5907 Y16.3720 F900
    G01 X15.4864 Y16.3828 F900
    G01 X15.3830 Y16.4002 F900
    G01 X15.2810 Y16.4242 F900
    G01 X15.2017 Y16.4551 F900
    G01 X15.1254 Y16.4926 F900
    G01 X15.0526 Y16.5367 F900
    G01 X14.9839 Y16.5869 F900
    G01 X14.9198 Y16.6429 F900
    G01 X14.8608 Y16.7042 F900
    G01 X14.8073 Y16.7704 F900
    G01 X14.7598 Y16.8409 F900
    G01 X14.7186 Y16.9154 F900
    G01 X14.6840 Y16.9931 F900
    G01 X14.6562 Y17.0735 F900
    G01 X14.6356 Y17.1560 F900
    G01 X14.6221 Y17.2401 F900
    G01 X14.6160 Y17.3249 F900
    G01 X14.6198 Y17.4435 F900
    G01 X16.8347 Y17.4490 F900
    G01 X16.8293 Y17.8449 F900
    G01 X16.7741 Y18.2369 F900
    G01 X16.7469 Y18.3252 F900
    G01 X16.7130 Y18.4112 F900
    G01 X16.6726 Y18.4943 F900
    G01 X16.6260 Y18.5741 F900
    G01 X16.5734 Y18.6500 F900
    G01 X16.5152 Y18.7218 F900
    G01 X16.4479 Y18.7876 F900
    G01 X16.3753 Y18.8476 F900
    G01 X16.2979 Y18.9013 F900
    G01 X16.2164 Y18.9483 F900
    G01 X16.1311 Y18.9882 F900
    G01 X16.0428 Y19.0209 F900
    G01 X15.9520 Y19.0460 F900
    G01 X15.8595 Y19.0634 F900
    G01 X15.7556 Y19.0766 F900
    G01 X15.6511 Y19.0835 F900
    G01 X15.5463 Y19.0842 F900
    G01 X15.4417 Y19.0787 F900
    G01 X15.3377 Y19.0669 F900
    G01 X15.2345 Y19.0490 F900
    G01 X15.1325 Y19.0249 F900
    G01 X15.0322 Y18.9947 F900
    G01 X14.9339 Y18.9587 F900
    G01 X14.8461 Y18.9108 F900
    G01 X14.7617 Y18.8572 F900
    G01 X14.6811 Y18.7980 F900
    G01 X14.6047 Y18.7336 F900
    G01 X14.5327 Y18.6641 F900
    G01 X14.4656 Y18.5901 F900
    G01 X14.4036 Y18.5116 F900
    G01 X14.3470 Y18.4292 F900
    G01 X14.2961 Y18.3432 F900
    G01 X14.2510 Y18.2539 F900
    G01 X14.2120 Y18.1619 F900
    G01 X14.1793 Y18.0674 F900
    G01 X14.1530 Y17.9709 F900
    G01 X14.1332 Y17.8729 F900
    G01 X14.1201 Y17.7738 F900
    G01 X14.1129 Y17.6143 F900
    G00 Z2.0000 F2100

    ;No. 33: Engraving 124
    G00 X8.8017 Y19.0028 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0000 F900
    G01 X9.3030 F900
    G01 Y18.2424 F900
    G01 X9.3821 Y18.3069 F900
    G01 X9.4653 Y18.3661 F900
    G01 X9.5523 Y18.4195 F900
    G01 X9.6426 Y18.4671 F900
    G01 X9.7359 Y18.5085 F900
    G01 X9.8318 Y18.5436 F900
    G01 X9.9297 Y18.5723 F900
    G01 X10.0294 Y18.5944 F900
    G01 X10.1303 Y18.6098 F900
    G01 X10.1735 Y18.6159 F900
    G01 X10.2171 Y18.6181 F900
    G01 X10.2608 Y18.6166 F900
    G01 X10.3041 Y18.6112 F900
    G01 X10.3468 Y18.6020 F900
    G01 X10.3885 Y18.5891 F900
    G01 X10.4289 Y18.5726 F900
    G01 X10.4678 Y18.5527 F900
    G01 X10.5047 Y18.5294 F900
    G01 X10.5394 Y18.5029 F900
    G01 X10.5717 Y18.4735 F900
    G01 X10.6013 Y18.4414 F900
    G01 X10.6280 Y18.4068 F900
    G01 X10.6515 Y18.3701 F900
    G01 X10.6717 Y18.3313 F900
    G01 X10.6884 Y18.2910 F900
    G01 X10.7015 Y18.2494 F900
    G01 X10.7109 Y18.2067 F900
    G01 X10.7410 Y17.9118 F900
    G01 Y16.0000 F900
    G01 X11.2424 F900
    G01 Y18.0496 F900
    G01 X11.2259 Y18.2259 F900
    G01 X11.3056 Y18.2937 F900
    G01 X11.3899 Y18.3558 F900
    G01 X11.4783 Y18.4119 F900
    G01 X11.5703 Y18.4618 F900
    G01 X11.6656 Y18.5052 F900
    G01 X11.7636 Y18.5418 F900
    G01 X11.8640 Y18.5715 F900
    G01 X11.9662 Y18.5942 F900
    G01 X12.0697 Y18.6098 F900
    G01 X12.1118 Y18.6158 F900
    G01 X12.1542 Y18.6181 F900
    G01 X12.1967 Y18.6169 F900
    G01 X12.2389 Y18.6120 F900
    G01 X12.2806 Y18.6035 F900
    G01 X12.3213 Y18.5915 F900
    G01 X12.3609 Y18.5761 F900
    G01 X12.3991 Y18.5573 F900
    G01 X12.4355 Y18.5354 F900
    G01 X12.4699 Y18.5104 F900
    G01 X12.5020 Y18.4826 F900
    G01 X12.5316 Y18.4522 F900
    G01 X12.5586 Y18.4193 F900
    G01 X12.5826 Y18.3843 F900
    G01 X12.6036 Y18.3473 F900
    G01 X12.6213 Y18.3087 F900
    G01 X12.6357 Y18.2687 F900
    G01 X12.6466 Y18.2276 F900
    G01 X12.6804 Y17.9118 F900
    G01 Y16.0000 F900
    G01 X13.1818 F900
    G01 Y18.0826 F900
    G01 X13.1708 Y18.2039 F900
    G01 X13.1641 Y18.2861 F900
    G01 X13.1505 Y18.3675 F900
    G01 X13.1300 Y18.4474 F900
    G01 X13.1028 Y18.5253 F900
    G01 X13.0691 Y18.6006 F900
    G01 X13.0291 Y18.6728 F900
    G01 X12.9831 Y18.7413 F900
    G01 X12.9314 Y18.8057 F900
    G01 X12.8745 Y18.8654 F900
    G01 X12.8127 Y18.9201 F900
    G01 X12.7283 Y18.9675 F900
    G01 X12.6403 Y19.0076 F900
    G01 X12.5491 Y19.0399 F900
    G01 X12.4554 Y19.0644 F900
    G01 X12.3601 Y19.0807 F900
    G01 X12.2637 Y19.0888 F900
    G01 X12.1669 Y19.0886 F900
    G01 X12.0705 Y19.0801 F900
    G01 X11.9752 Y19.0634 F900
    G01 X11.8801 Y19.0375 F900
    G01 X11.7866 Y19.0067 F900
    G01 X11.6947 Y18.9711 F900
    G01 X11.6049 Y18.9306 F900
    G01 X11.5173 Y18.8856 F900
    G01 X11.4322 Y18.8359 F900
    G01 X11.3498 Y18.7819 F900
    G01 X11.2704 Y18.7237 F900
    G01 X11.1941 Y18.6613 F900
    G01 X11.1212 Y18.5950 F900
    G01 X11.0896 Y18.6575 F900
    G01 X11.0527 Y18.7170 F900
    G01 X11.0109 Y18.7732 F900
    G01 X10.9645 Y18.8256 F900
    G01 X10.9138 Y18.8739 F900
    G01 X10.8591 Y18.9177 F900
    G01 X10.8010 Y18.9566 F900
    G01 X10.7397 Y18.9905 F900
    G01 X10.6758 Y19.0191 F900
    G01 X10.6096 Y19.0421 F900
    G01 X10.5418 Y19.0594 F900
    G01 X10.4483 Y19.0743 F900
    G01 X10.3539 Y19.0823 F900
    G01 X10.2592 Y19.0834 F900
    G01 X10.1646 Y19.0776 F900
    G01 X10.0708 Y19.0650 F900
    G01 X9.9781 Y19.0455 F900
    G01 X9.8871 Y19.0193 F900
    G01 X9.5838 Y18.8659 F900
    G01 X9.3085 Y18.6667 F900
    G01 X9.3030 Y19.0028 F900
    G01 X8.8017 F900
    G00 Z2.0000 F2100

    ;No. 34: Engraving 123
    G00 X5.6942 Y16.9862 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X5.6889 Y16.9382 F900
    G01 X5.6878 Y16.8899 F900
    G01 X5.6909 Y16.8417 F900
    G01 X5.6983 Y16.7940 F900
    G01 X5.7098 Y16.7471 F900
    G01 X5.7253 Y16.7013 F900
    G01 X5.7448 Y16.6571 F900
    G01 X5.7681 Y16.6148 F900
    G01 X5.7950 Y16.5747 F900
    G01 X5.8485 Y16.5124 F900
    G01 X5.9093 Y16.4767 F900
    G01 X5.9730 Y16.4463 F900
    G01 X6.0390 Y16.4215 F900
    G01 X6.1069 Y16.4023 F900
    G01 X6.1761 Y16.3890 F900
    G01 X6.2463 Y16.3816 F900
    G01 X6.3168 Y16.3802 F900
    G01 X6.4164 Y16.3856 F900
    G01 X6.5155 Y16.3981 F900
    G01 X6.6133 Y16.4176 F900
    G01 X6.7095 Y16.4441 F900
    G01 X6.8036 Y16.4773 F900
    G01 X6.8951 Y16.5172 F900
    G01 X6.9835 Y16.5634 F900
    G01 X7.0684 Y16.6159 F900
    G01 X7.1493 Y16.6743 F900
    G01 X7.2259 Y16.7383 F900
    G01 X7.2204 Y17.5758 F900
    G01 X7.1242 Y17.5764 F900
    G01 X7.0280 Y17.5746 F900
    G01 X6.9319 Y17.5704 F900
    G01 X6.8359 Y17.5639 F900
    G01 X6.7401 Y17.5550 F900
    G01 X6.6446 Y17.5437 F900
    G01 X6.5494 Y17.5301 F900
    G01 X6.4545 Y17.5142 F900
    G01 X6.3601 Y17.4958 F900
    G01 X6.2661 Y17.4752 F900
    G01 X6.1727 Y17.4523 F900
    G01 X6.0799 Y17.4270 F900
    G01 X6.0345 Y17.4123 F900
    G01 X5.9906 Y17.3937 F900
    G01 X5.9485 Y17.3711 F900
    G01 X5.9087 Y17.3449 F900
    G01 X5.8713 Y17.3152 F900
    G01 X5.8368 Y17.2823 F900
    G01 X5.8054 Y17.2464 F900
    G01 X5.7773 Y17.2078 F900
    G01 X5.7529 Y17.1668 F900
    G01 X5.7321 Y17.1238 F900
    G01 X5.7154 Y17.0792 F900
    G01 X5.7027 Y17.0332 F900
    G01 X5.6942 Y16.9862 F900
    G00 Z2.0000 F2100

    ;No. 35: Engraving 122
    G00 X5.1763 Y16.9642 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X5.1704 Y16.8827 F900
    G01 X5.1717 Y16.8010 F900
    G01 X5.1801 Y16.7198 F900
    G01 X5.1955 Y16.6396 F900
    G01 X5.2178 Y16.5610 F900
    G01 X5.2469 Y16.4847 F900
    G01 X5.2825 Y16.4112 F900
    G01 X5.3244 Y16.3410 F900
    G01 X5.3722 Y16.2748 F900
    G01 X5.4256 Y16.2130 F900
    G01 X5.4842 Y16.1561 F900
    G01 X5.5476 Y16.1045 F900
    G01 X5.6152 Y16.0587 F900
    G01 X5.6865 Y16.0188 F900
    G01 X5.7658 Y15.9835 F900
    G01 X5.8601 Y15.9576 F900
    G01 X5.9559 Y15.9381 F900
    G01 X6.0528 Y15.9249 F900
    G01 X6.1503 Y15.9181 F900
    G01 X6.2480 Y15.9177 F900
    G01 X6.3456 Y15.9238 F900
    G01 X6.4426 Y15.9363 F900
    G01 X6.5385 Y15.9551 F900
    G01 X6.6330 Y15.9803 F900
    G01 X6.7256 Y16.0116 F900
    G01 X6.8159 Y16.0489 F900
    G01 X6.9036 Y16.0921 F900
    G01 X6.9883 Y16.1410 F900
    G01 X7.0695 Y16.1954 F900
    G01 X7.1470 Y16.2550 F900
    G01 X7.2204 Y16.3196 F900
    G01 X7.2259 Y16.0000 F900
    G01 X7.7218 F900
    G01 Y18.1433 F900
    G01 X7.6942 Y18.3471 F900
    G01 X7.6501 Y18.4904 F900
    G01 X7.6159 Y18.5627 F900
    G01 X7.5751 Y18.6315 F900
    G01 X7.5281 Y18.6963 F900
    G01 X7.4752 Y18.7564 F900
    G01 X7.4170 Y18.8112 F900
    G01 X7.3539 Y18.8605 F900
    G01 X7.2865 Y18.9036 F900
    G01 X7.1939 Y18.9437 F900
    G01 X7.0993 Y18.9787 F900
    G01 X7.0028 Y19.0083 F900
    G01 X6.9048 Y19.0326 F900
    G01 X6.8057 Y19.0514 F900
    G01 X6.7056 Y19.0646 F900
    G01 X6.6050 Y19.0723 F900
    G01 X6.5041 Y19.0744 F900
    G01 X6.4064 Y19.0737 F900
    G01 X6.3087 Y19.0706 F900
    G01 X6.2110 Y19.0651 F900
    G01 X6.1136 Y19.0573 F900
    G01 X6.0164 Y19.0471 F900
    G01 X5.9194 Y19.0345 F900
    G01 X5.8228 Y19.0196 F900
    G01 X5.7266 Y19.0023 F900
    G01 X5.6308 Y18.9828 F900
    G01 X5.5355 Y18.9609 F900
    G01 X5.4408 Y18.9366 F900
    G01 Y18.4298 F900
    G01 X5.5356 Y18.4682 F900
    G01 X5.6319 Y18.5026 F900
    G01 X5.7296 Y18.5330 F900
    G01 X5.8285 Y18.5593 F900
    G01 X5.9284 Y18.5815 F900
    G01 X6.0291 Y18.5994 F900
    G01 X6.1305 Y18.6131 F900
    G01 X6.2323 Y18.6226 F900
    G01 X6.3345 Y18.6278 F900
    G01 X6.4368 Y18.6287 F900
    G01 X6.5391 Y18.6254 F900
    G01 X6.6411 Y18.6178 F900
    G01 X6.7427 Y18.6059 F900
    G01 X6.8438 Y18.5898 F900
    G01 X6.8879 Y18.5758 F900
    G01 X6.9307 Y18.5580 F900
    G01 X6.9717 Y18.5366 F900
    G01 X7.0107 Y18.5116 F900
    G01 X7.0474 Y18.4833 F900
    G01 X7.0815 Y18.4519 F900
    G01 X7.1126 Y18.4176 F900
    G01 X7.1406 Y18.3807 F900
    G01 X7.1653 Y18.3415 F900
    G01 X7.1865 Y18.3003 F900
    G01 X7.2040 Y18.2574 F900
    G01 X7.2176 Y18.2132 F900
    G01 X7.2274 Y18.1679 F900
    G01 X7.2331 Y18.1219 F900
    G01 X7.2347 Y18.0756 F900
    G01 X7.2323 Y18.0293 F900
    G01 X7.2259 Y17.9835 F900
    G01 X6.7300 Y17.9504 F900
    G01 X6.2474 Y17.8977 F900
    G01 X5.9349 Y17.8230 F900
    G01 X5.6844 Y17.7292 F900
    G01 X5.6179 Y17.6957 F900
    G01 X5.5545 Y17.6566 F900
    G01 X5.4948 Y17.6122 F900
    G01 X5.4391 Y17.5627 F900
    G01 X5.3878 Y17.5087 F900
    G01 X5.3414 Y17.4505 F900
    G01 X5.3002 Y17.3884 F900
    G01 X5.2645 Y17.3231 F900
    G01 X5.2346 Y17.2549 F900
    G01 X5.2106 Y17.1844 F900
    G01 X5.1929 Y17.1121 F900
    G01 X5.1814 Y17.0385 F900
    G01 X5.1763 Y16.9642 F900
    G00 Z2.0000 F2100

    ;No. 36: Engraving 121
    G00 X2.4325 Y16.5124 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0220 F900
    G01 X2.7532 Y15.9702 F900
    G01 X3.0775 Y15.9499 F900
    G01 X3.1774 Y15.9419 F900
    G01 X3.2777 Y15.9426 F900
    G01 X3.3775 Y15.9520 F900
    G01 X3.4761 Y15.9701 F900
    G01 X3.5727 Y15.9966 F900
    G01 X3.6667 Y16.0314 F900
    G01 X3.7573 Y16.0743 F900
    G01 X3.8439 Y16.1248 F900
    G01 X3.9257 Y16.1827 F900
    G01 X4.0023 Y16.2474 F900
    G01 X4.0729 Y16.3186 F900
    G01 X4.1370 Y16.3956 F900
    G01 X4.1943 Y16.4779 F900
    G01 X4.2766 Y16.6808 F900
    G01 X4.3168 Y16.9256 F900
    G01 Y20.0000 F900
    G01 X2.9449 F900
    G01 Y19.5813 F900
    G01 X3.7934 Y19.5758 F900
    G01 Y17.1956 F900
    G01 X3.7713 Y16.8705 F900
    G01 X3.7674 Y16.8293 F900
    G01 X3.7600 Y16.7885 F900
    G01 X3.7490 Y16.7486 F900
    G01 X3.7345 Y16.7097 F900
    G01 X3.7167 Y16.6723 F900
    G01 X3.6958 Y16.6365 F900
    G01 X3.6718 Y16.6027 F900
    G01 X3.6450 Y16.5711 F900
    G01 X3.6155 Y16.5420 F900
    G01 X3.5836 Y16.5156 F900
    G01 X3.5495 Y16.4920 F900
    G01 X3.5135 Y16.4715 F900
    G01 X3.4758 Y16.4542 F900
    G01 X3.4368 Y16.4403 F900
    G01 X3.3967 Y16.4298 F900
    G01 X3.2999 Y16.4159 F900
    G01 X3.2025 Y16.4069 F900
    G01 X3.1048 Y16.4029 F900
    G01 X3.0070 Y16.4039 F900
    G01 X2.9093 Y16.4097 F900
    G01 X2.8121 Y16.4206 F900
    G01 X2.7156 Y16.4363 F900
    G01 X2.6200 Y16.4569 F900
    G01 X2.5255 Y16.4823 F900
    G01 X2.4325 Y16.5124 F900
    G00 Z2.0000 F2100

    ;No. 37: Engraving 139
    G00 X48.2066 Y20.0000 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y16.0000 F900
    G01 X49.7493 F900
    G01 X49.8461 Y15.9999 F900
    G01 X49.9427 Y16.0051 F900
    G01 X50.0389 Y16.0154 F900
    G01 X50.1344 Y16.0309 F900
    G01 X50.2290 Y16.0515 F900
    G01 X50.3223 Y16.0771 F900
    G01 X50.4141 Y16.1077 F900
    G01 X50.5041 Y16.1433 F900
    G01 X50.5929 Y16.1822 F900
    G01 X50.6780 Y16.2286 F900
    G01 X50.7588 Y16.2822 F900
    G01 X50.8346 Y16.3426 F900
    G01 X50.9049 Y16.4093 F900
    G01 X50.9693 Y16.4818 F900
    G01 X51.0271 Y16.5596 F900
    G01 X51.0779 Y16.6422 F900
    G01 X51.1215 Y16.7288 F900
    G01 X51.1574 Y16.8188 F900
    G01 X51.1854 Y16.9116 F900
    G01 X51.2053 Y17.0065 F900
    G01 X51.2169 Y17.1027 F900
    G01 X51.2202 Y17.1996 F900
    G01 X51.2217 Y17.2894 F900
    G01 X51.2153 Y17.3790 F900
    G01 X51.2012 Y17.4677 F900
    G01 X51.1794 Y17.5548 F900
    G01 X51.1501 Y17.6398 F900
    G01 X51.1135 Y17.7218 F900
    G01 X51.0700 Y17.8003 F900
    G01 X51.0197 Y17.8748 F900
    G01 X50.9632 Y17.9446 F900
    G01 X50.9008 Y18.0092 F900
    G01 X50.8330 Y18.0682 F900
    G01 X50.7604 Y18.1210 F900
    G01 X50.6834 Y18.1673 F900
    G01 X50.6027 Y18.2067 F900
    G01 X50.5188 Y18.2389 F900
    G01 X50.4325 Y18.2638 F900
    G01 X50.3444 Y18.2810 F900
    G01 X50.3499 Y18.3030 F900
    G01 X50.5537 Y18.4298 F900
    G01 X50.6860 Y18.5565 F900
    G01 X50.8127 Y18.7548 F900
    G01 X50.8581 Y18.9117 F900
    G01 X50.8727 Y18.9818 F900
    G01 X50.8813 Y19.0530 F900
    G01 X50.8839 Y19.1246 F900
    G01 X50.8804 Y19.1961 F900
    G01 X50.8709 Y19.2671 F900
    G01 X50.8554 Y19.3371 F900
    G01 X50.8341 Y19.4055 F900
    G01 X50.8071 Y19.4719 F900
    G01 X50.7745 Y19.5357 F900
    G01 X50.7367 Y19.5966 F900
    G01 X50.6939 Y19.6540 F900
    G01 X50.6464 Y19.7077 F900
    G01 X50.5689 Y19.7642 F900
    G01 X50.4875 Y19.8149 F900
    G01 X50.4026 Y19.8595 F900
    G01 X50.3147 Y19.8977 F900
    G01 X50.2242 Y19.9294 F900
    G01 X50.1316 Y19.9543 F900
    G01 X50.0374 Y19.9724 F900
    G01 X49.9421 Y19.9835 F900
    G01 X49.6446 Y20.0000 F900
    G01 X48.2066 F900
    G00 Z2.0000 F2100

    ;No. 38: Engraving 140
    G00 X48.7300 Y19.5482 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X48.7355 Y18.3912 F900
    G01 X49.6705 Y18.3936 F900
    G01 X49.8454 Y18.4198 F900
    G01 X50.0138 Y18.4738 F900
    G01 X50.0565 Y18.4954 F900
    G01 X50.0971 Y18.5206 F900
    G01 X50.1354 Y18.5492 F900
    G01 X50.1711 Y18.5811 F900
    G01 X50.2039 Y18.6159 F900
    G01 X50.2335 Y18.6535 F900
    G01 X50.2597 Y18.6935 F900
    G01 X50.2823 Y18.7356 F900
    G01 X50.3012 Y18.7795 F900
    G01 X50.3162 Y18.8249 F900
    G01 X50.3272 Y18.8715 F900
    G01 X50.3341 Y18.9188 F900
    G01 X50.3369 Y18.9665 F900
    G01 X50.3355 Y19.0143 F900
    G01 X50.3299 Y19.0618 F900
    G01 X50.3301 Y19.1000 F900
    G01 X50.3270 Y19.1379 F900
    G01 X50.3204 Y19.1755 F900
    G01 X50.3106 Y19.2123 F900
    G01 X50.2975 Y19.2482 F900
    G01 X50.2813 Y19.2827 F900
    G01 X50.2622 Y19.3156 F900
    G01 X50.2401 Y19.3467 F900
    G01 X50.2154 Y19.3758 F900
    G01 X50.1882 Y19.4025 F900
    G01 X50.1588 Y19.4267 F900
    G01 X50.1273 Y19.4482 F900
    G01 X50.0940 Y19.4669 F900
    G01 X50.0593 Y19.4825 F900
    G01 X50.0232 Y19.4949 F900
    G01 X49.9862 Y19.5041 F900
    G01 X49.8904 Y19.5191 F900
    G01 X49.7944 Y19.5322 F900
    G01 X49.6980 Y19.5434 F900
    G01 X49.6015 Y19.5526 F900
    G01 X49.5048 Y19.5599 F900
    G01 X49.4080 Y19.5652 F900
    G01 X49.3111 Y19.5686 F900
    G01 X49.2142 Y19.5701 F900
    G01 X49.1172 Y19.5696 F900
    G01 X49.0203 Y19.5672 F900
    G01 X48.9234 Y19.5628 F900
    G01 X48.8266 Y19.5565 F900
    G01 X48.7300 Y19.5482 F900
    G00 Z2.0000 F2100

    ;No. 39: Engraving 141
    G00 X48.7300 Y17.9394 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 X48.7355 Y16.4518 F900
    G01 X49.8263 Y16.4603 F900
    G01 X50.0444 Y16.4910 F900
    G01 X50.2562 Y16.5510 F900
    G01 X50.3079 Y16.5737 F900
    G01 X50.3575 Y16.6007 F900
    G01 X50.4046 Y16.6319 F900
    G01 X50.4488 Y16.6670 F900
    G01 X50.4898 Y16.7058 F900
    G01 X50.5274 Y16.7480 F900
    G01 X50.5612 Y16.7932 F900
    G01 X50.5910 Y16.8412 F900
    G01 X50.6166 Y16.8915 F900
    G01 X50.6378 Y16.9439 F900
    G01 X50.6544 Y16.9979 F900
    G01 X50.6663 Y17.0531 F900
    G01 X50.6735 Y17.1091 F900
    G01 X50.6758 Y17.1655 F900
    G01 X50.6732 Y17.2219 F900
    G01 X50.6769 Y17.2748 F900
    G01 X50.6760 Y17.3278 F900
    G01 X50.6705 Y17.3805 F900
    G01 X50.6605 Y17.4325 F900
    G01 X50.6461 Y17.4835 F900
    G01 X50.6273 Y17.5331 F900
    G01 X50.6043 Y17.5808 F900
    G01 X50.5773 Y17.6264 F900
    G01 X50.5465 Y17.6695 F900
    G01 X50.5120 Y17.7098 F900
    G01 X50.4742 Y17.7469 F900
    G01 X50.4334 Y17.7807 F900
    G01 X50.3898 Y17.8108 F900
    G01 X50.3438 Y17.8370 F900
    G01 X50.2956 Y17.8592 F900
    G01 X50.2458 Y17.8772 F900
    G01 X50.0138 Y17.9284 F900
    G01 X49.7713 Y17.9449 F900
    G01 X48.7300 Y17.9394 F900
    G00 Z2.0000 F2100

    ;No. 40: Engraving 142
    G00 X51.9532 Y20.1818 Z2.0000 F2100
    G00 Z-0.5000 F2100
    G01 Z-1.0100 F180
    G01 Y20.1543 F900
    G01 X52.1799 Y19.9297 F900
    G01 X52.4160 Y19.6419 F900
    G01 X52.5427 Y19.4545 F900
    G01 X52.7935 Y18.9816 F900
    G01 X52.8317 Y18.8925 F900
    G01 X52.8674 Y18.8024 F900
    G01 X52.9006 Y18.7114 F900
    G01 X52.9314 Y18.6195 F900
    G01 X52.9596 Y18.5268 F900
    G01 X52.9853 Y18.4333 F900
    G01 X53.0084 Y18.3392 F900
    G01 X53.0290 Y18.2445 F900
    G01 X53.0470 Y18.1493 F900
    G01 X53.0624 Y18.0536 F900
    G01 X53.0751 Y17.9575 F900
    G01 X53.0853 Y17.8612 F900
    G01 X53.0928 Y17.7645 F900
    G01 X53.0977 Y17.6677 F900
    G01 X53.0999 Y17.5709 F900
    G01 X53.0991 Y17.4716 F900
    G01 X53.0955 Y17.3725 F900
    G01 X53.0892 Y17.2734 F900
    G01 X53.0802 Y17.1746 F900
    G01 X53.0685 Y17.0761 F900
    G01 X53.0541 Y16.9779 F900
    G01 X53.0369 Y16.8801 F900
    G01 X53.0171 Y16.7829 F900
    G01 X52.9946 Y16.6862 F900
    G01 X52.9695 Y16.5902 F900
    G01 X52.9417 Y16.4950 F900
    G01 X52.9114 Y16.4005 F900
    G01 X52.8784 Y16.3069 F900
    G01 X52.8428 Y16.2142 F900
    G01 X52.8048 Y16.1226 F900
    G01 X52.6331 Y15.7772 F900
    G01 X52.4574 Y15.4971 F900
    G01 X52.2566 Y15.2343 F900
    G01 X51.9532 Y14.9146 F900
    G01 Y14.8926 F900
    G01 X52.5647 F900
    G01 X52.7756 Y15.1495 F900
    G01 X52.9941 Y15.4698 F900
    G01 X53.0454 Y15.5543 F900
    G01 X53.0943 Y15.6400 F900
    G01 X53.1411 Y15.7271 F900
    G01 X53.1855 Y15.8153 F900
    G01 X53.2277 Y15.9047 F900
    G01 X53.2674 Y15.9951 F900
    G01 X53.3049 Y16.0866 F900
    G01 X53.3399 Y16.1789 F900
    G01 X53.3725 Y16.2722 F900
    G01 X53.4026 Y16.3663 F900
    G01 X53.4303 Y16.4611 F900
    G01 X53.4555 Y16.5567 F900
    G01 X53.4782 Y16.6528 F900
    G01 X53.4984 Y16.7495 F900
    G01 X53.5160 Y16.8467 F900
    G01 X53.5311 Y16.9444 F900
    G01 X53.5437 Y17.0424 F900
    G01 X53.5537 Y17.1406 F900
    G01 X53.5611 Y17.2392 F900
    G01 X53.5659 Y17.3378 F900
    G01 X53.5682 Y17.4366 F900
    G01 X53.5679 Y17.5354 F900
    G01 X53.5678 Y17.6376 F900
    G01 X53.5649 Y17.7397 F900
    G01 X53.5594 Y17.8417 F900
    G01 X53.5511 Y17.9436 F900
    G01 X53.5402 Y18.0451 F900
    G01 X53.5266 Y18.1464 F900
    G01 X53.5102 Y18.2473 F900
    G01 X53.4913 Y18.3477 F900
    G01 X53.4696 Y18.4475 F900
    G01 X53.4453 Y18.5467 F900
    G01 X53.4185 Y18.6453 F900
    G01 X53.3889 Y18.7431 F900
    G01 X53.3569 Y18.8401 F900
    G01 X53.3222 Y18.9363 F900
    G01 X53.2850 Y19.0314 F900
    G01 X53.2453 Y19.1256 F900
    G01 X53.2032 Y19.2186 F900
    G01 X53.1585 Y19.3105 F900
    G01 X53.1115 Y19.4012 F900
    G01 X53.0621 Y19.4906 F900
    G01 X53.0103 Y19.5787 F900
    G01 X52.7962 Y19.8959 F900
    G01 X52.5647 Y20.1818 F900
    G01 X51.9532 F900
    G00 Z2.0000 F2100
    G00 X0.0000 Y0.0000 F2100

    M05

    #26724
    Profile photo of Hansang
    Hansang
    Participant

    Sorry, I did’t meant to post the entire gcode. I guess you can’t edit/delete posts.

    The Estlcam e8 file is here:
    https://app.box.com/s/qlcmb7duw8kxavsyrwfpujx16x32wq0m

    gcode is here:
    https://app.box.com/s/1pq557ipbe7aczwjwrb4o91lrh1h0fh0

    thank you

    #26753
    Profile photo of vicious1
    vicious1
    Keymaster

    Once you move the head to where you want it, Try resetting the arduino then running your gcode.

    If that works you can add G92 x0 y0 z0 to the beginning of your gcode to reset you axis automatically.

    #26866
    Profile photo of Hansang
    Hansang
    Participant

    Thank you. I’m on the road right now, but I’ll give a shot and report back.

    #27243
    Profile photo of Hansang
    Hansang
    Participant

    That did it! Thank you so much. In my haste (wanting to test) I forgot to turn on the router. So I broke my bit! LOL. Live and learn.

    I’ll add the G92 x0 y0 z0 to my gcode going forward.

    Back to testing!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.