Wiring layout for Z axis

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Walter Walter 1 year, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #6631
    Profile photo of Ryan

    So obviously a lot of folks us the rails for the X and Y cables, but given that the wire comes out the top of the z, how are you guys best wiring that to keep it free from obstructions etc? between the stepper wire and the thick D660 wire, i need to manage this better 🙂

    Profile photo of vicious1

    I just have mine zip tied from the z tower, to one of the roller motor mounts. The white wire I ship the kits with keeps itself in a nice loop if you bend it right.

    Profile photo of Walter

    Most of us are using some form of cable chain. search mpcnc on YouTube for examples. there are all kinds of customs cable chain mounting options on thingiverse

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.