Yet another printer

New Home Forum Things You Have Made Yet another printer

This topic contains 2 replies, has 2 voices, and was last updated by  Jakob A 2 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #38097

    Jakob A
    Participant

    You would think 2 of these would be enough, but they are running so well that I don’t want to mess with them. And I needed one for experimenting πŸ˜€
    So another Ultimaker, this time customized a bit. (If anyone wants the updated drawings pm me, might put it on Thingiverse later)

    Used mdf for the sides this time, seems to work great.

    Always feels good when you push everything together and it just fits.

    Umo_high

    Attachments:
    1 user thanked author for this post.
    #38103

    Jeffeb3
    Participant

    I think you should add a few more parts…

    BTW, that looks like plywood, not MDF.

    Looks very sharp though. Did you carve those pieces on an MPCNC?

    #38104

    Jakob A
    Participant

    Only the sides are mdf.
    Cut on mpcnc, the plywood with a 2 mm bit (which after the first failed cut turned out to be 1.85mm, damn chinese…)
    Used a 1/8″ inch for the mdf.

    I added some more parts πŸ˜€

    Umo_high2

    Attachments:
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.